Factory Cheap Poly-crystalline Solar Panel 90W Factory in Seattle
Short Description:
The key to our success is "Good Product Quality, Reasonable Price and Efficient Service" for Factory Cheap Poly-crystalline Solar Panel 90W Factory in Seattle, We always welcome new and old customers presents us with valuable advice and proposals for cooperation, let us grow and develop together, and to contribute to our community and staff!
Poly-crystalline Solar Panel 90W
Technical parameter
Maximum Power(W) 90W
Optimum Power Voltage(Vmp) 18.33V
Optimum Operating Current(Imp) 4.91A
Open Circuit Voltage(Voc) 21.96V
Short Circuit Current(Isc) 4.89A
Mechanical Characteristics
Cell Type Poly-crystalline 156x104mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1008x678x35mm
Weight 8.0KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*104mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Here is a typical time lapse video of a 3KW Solar PV system in Cottage country Ontario, Canada. This system is Net Metered with a battery backup for times when Hydro is not available.
For more information please see out web Site at:
WWW.gr56energysolutions.ca
Music by www.danosongs.com/
Homemade Wind Turbine Generator! Wind Power Generator. Easy DIY Instructions. items needed: PVC Pipe, propeller blade, DC motor and wire. Stand is made of 3/4″ PVC. Produces essentially “free” usable power to run radios and small lights etc… add the optional battery/inverter for making AC power. adding a storage battery also makes it possible to run larger items (whether the wind is blowing or not) …and add a small inverter to run AC powered items. this “table top” size model would be useful in many off-grid situations including SHTF/Emergency/Power Outage/Camping/Rural Living etc… simple assembly/disassembly. durable, lightweight and portable. notes: propeller blades of this kind can be found at your local hobby store. use PVC Pipe Cement to make the stand more “permanent”. the wire i used is from an old extension cord. since filming i’ve reduced the length of the wire from 8 ft. down to 2 ft. (shortening the wire increases power output). low power radio was used. operates on as little as 28-35ma at 2v-3v. (43ma at 2.4v was average output using small desk fan). volt/amp readings on meter were all over the place when i used the leaf blower (5 to 10 times higher vs. desk fan). leaf blower produces wind up to 140MPH. i blasted the wind turbine with blower from about 3 feet away for over 5 mins and it stood firm entire time.