Factory Cheap Hot Poly-crystalline Solar Panel 80W in Sudan
Short Description:
We are committed to providing easy,time-saving and money-saving one-stop purchasing service of consumer for Factory Cheap Hot Poly-crystalline Solar Panel 80W in Sudan, We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development.We strongly believe that we can do better and better.
Poly-crystalline Solar Panel 80W
Technical parameter
Maximum Power(W) 80W
Optimum Power Voltage(Vmp) 18.13V
Optimum Operating Current(Imp) 4.70A
Open Circuit Voltage(Voc) 21.79V
Short Circuit Current(Isc) 5.16A
Mechanical Characteristics
Cell Type Poly-crystalline 156x104mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1008x678x35mm
Weight 8.3KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*104mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Amazon-UK: http://npad.us/neck/2/uk/B008RN7VIG/review
40w Photonic Universe solar charging kit (solar panel, 5m cable, charge controller) This includes a monocrystalline made of high efficiency German cells (good output even without direct sunlight).
The is great for permanent outdoor use to provide free energy for a 12v battery (or bank) to then power lights, Tv, stereo, fridge etc such as in a camper van, boat, shed or farm.
Waterproof design ensures the can be used in all weather conditions.
The a 10a which uses Pwm technology to protect your batteries and extend their lifetime.
It has the full set of protection functions: reverse current, over charge, discharge, overload, overheating etc.
The also 5m of special attached to the with Mc4 connectors be cut off when wiring to the or for connecting an extension (not included).
characteristics: Peak power: Maximum voltage: 17.5v current: 2.22a Open circuit 21.6v Short 2.4a allowance range: +/3% Dimensions: 51 x 61 x 2.5 cm Weight: 4.2 kg 4 mounting for ease of installation 5m of quality 2.5mm cross section with 3 pairs of terminals (input, battery, output) for wires up to 6mm2 Leds to indicate charging, and Temperature sensor for automatic compensation (-30mv/c/12v) Self-consumption: 6ma Size: 14 x 6.5 x 3.5 cm 140 g 4 Detailed user manual for (explains and operations) Please note the might be dispatched in a separate package.
If need advice about this product do hesitate to contact us.
The recent upsurge in the demand of PV systems is due to the fact that they produce electric power without hampering the environment by directly converting the solar radiation into electric power. Solar energy is completely natural, it is considered a clean energy source. So the study on improving the efficiency of solar panel is very necessary. The main objective of this project is
➢ To record the measured voltage and current for efficiency calculation of SPV panel with and without dust.
(a) Different days (b) Different months
➢ To compare the calculated efficiency of SPV panel with and without dust.
➢ To design and implement the microcontroller based dust cleaning system.
➢ To maximize the efficiency
Finally, we can say that the Aim of this project is to increase the efficiency and power output of the solar panel.
