Factory Cheap Hot Mono-Crystalline 10W Solar Panel in Chicago
Short Description:
We always think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and the living for Factory Cheap Hot Mono-Crystalline 10W Solar Panel in Chicago, All the opinions and suggestions will be greatly appreciated! The good cooperation could improve both of us into better development!
Mono-Crystalline 10W Solar Panel
Technical parameter
Maximum Power(W) 10W
Optimum Power Voltage(Vmp) 17.56V
Optimum Operating Current(Imp) 0.58A
Open Circuit Voltage(Voc) 21.35V
Short Circuit Current(Isc) 0.64A
Mechanical Characteristics
Cell Type Mono-crystalline 52x35mm
No of Cell 36 (4x9pcs)
Dimensions 250x370x17mm
Weight 1.2Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 52*35mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
This is a simple demo of a solar cell array powering a 12 volt motor. You can clearly see the power being produced!
Amazon-UK: http://npad.us/neck/2/uk/B01BCK7216/review
100w Photonic Universe monocrystalline solar panel made of high efficiency German cells, with 2x5m of special cable perfect source of free power for charging your 12v battery This waterproof is for permanent outdoor use to provide electricity for batteries to various applications such as in a motorhome, caravan, boat, or for lighting, off-grid and back up It’s fitted with of specially designed for panels to carry currents with negligible loss.
The also comes with Mc4 connectors which can be used for easy connectivity if existing has (otherwise just cut them and bare wires).
The long-lasting, high-efficiency and the tough, sealed, aluminium frame will give years and of consistent, power.
ensures the be in all weather conditions.
specifications: Peak power: Maximum voltage: 17.5v current: 5.71a Open circuit 21.6v Short 6.17a allowance range: +/3% Dimensions: 945 x 670 x 35 mm Weight: 7.2 kg 4 mounting for ease of installation 5m of quality 4.0mm cross section with Note that the of this is so for it either requires a suitable charge controller or it be added to with a / inverter.
Please contact if have any questions about this product.
