Excellent quality for Mono-Crystalline 250W Solar Panel Uruguay Factory
Short Description:
We insist on the principle of development of 'High quality, Efficiency, Sincerity and Down-to-earth working approach' to provide you with excellent service of processing for Excellent quality for Mono-Crystalline 250W Solar Panel Uruguay Factory, We warmly welcome all interested customers to contact us for more information.
Mono-Crystalline 250W Solar Panel
Technical parameter
Maximum Power(W) 250W
Optimum Power Voltage(Vmp) 30.3V
Optimum Operating Current(Imp) 8.29A
Open Circuit Voltage(Voc) 36.76V
Short Circuit Current(Isc) 8.91A
Mechanical Characteristics
Cell Type Monocrystalline 156x156mm (6 inch)
No of Cell 60 (6x10pcs)
Dimensions 1640x990x40mm
Weight 18.0KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
This video shows how to turn on the solar system installed by SolarCity, once the electric company swaps out the net meter and gives the OK.
A Solar City employee explains the solar system, the inverter, the monitoring system, and how to turn the system on.
When you have SolarCity install your solar system, they have an electrician to wire up a portion to communicate with your electric panel inside, and there is an inverter, and a few other pieces outside the house, including the main switch that turns the whole system on. Watch this video to learn about the system and to find out about how to turn on your system, and how to monitor the system with the SolarEdge inverter. These instructions would be similar for other solar systems too.
Catch this related documentary about decisions to go solar with a Power Purchase Agreement: https://youtu.be/JHXSUf2t7zw
Special Discount on ECO-WORTHY 1200W Grid Tie Monocrystalline Solar Panel Kit. Click here to get it: http://amzn.to/2nGhFkK
For more deals check out http://www.GeekDealsUS.com
