Discountable price Mono-Crystalline 30W Solar Panel for South Korea Factories

Short Description:


Product Detail

Product Tags

Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs of Discountable price Mono-Crystalline 30W Solar Panel for South Korea Factories, We are also constantly looking to establish relationship with new suppliers to provide innovative and smart solution to our valued customers.


Mono-Crystalline 30W Solar Panel

Technical parameter

Maximum Power(W)                           30W

Optimum Power Voltage(Vmp)        17.66V

Optimum Operating Current(Imp)    1.71A

Open Circuit Voltage(Voc)                 21.39V

Short Circuit Current(Isc)                   1.88A

Mechanical Characteristics

Cell Type Mono-crystalline                125×41.6mm

No of Cell                                             36 (4x9pcs)

Dimensions                                        449x554x25mm

Weight                                                  2.8Kg

Front Glass                                         3.5mm,High Transmission, Low Iron,Tempered Glass

Junction box                                        IP65 Rated

Output Cable                                      TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                 -40°C ~ + 85°C

Maximum System Voltage:                    600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.47%

Temperature Coefficients of Voc:        -0.389%

Temperature Coefficients of Isc:           0.057%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Mono-crystalline solar cell 125*41.6mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Poly-crystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • Ok, the weather finally cooled off and allowed me to finish the panel. I coated the whole thing in 4 coats of KILZ white sealer. I did not use pegboard for the cell mounting substrate because I didn’t like the holes. I instead used 1/8″ door skin which worked out excellent. I also did not glue the cells down with blobs of silicone. I decided to use 1″ Scotch heavy duty mounting squares which are adhesive on both sides. You just peel the tape off of the outside and stick them down. I am not sure how these will work VS. silicone in the long run, but I experimented with a cell by sticking it onto a scrap piece of door skin and the bond was permanent. I had to destroy the cell to get it off of the scrap piece. So, hopefully they will work. All that is left to do now is get a piece of glass cut, silicone that down and put some aluminum channel on the outside. This entire thing is going to cost around $140 to build. The panel puts out 63 watts, 19.25 volts and 3.63 amps. Not bad.



    Together with our partner Giertsen Bredenoord installed an an off-grid solar-based power plant at the Medina hospital in Somalia. The installation makes optimal use of solar energy in combination with an efficient tuned genset.

    Dutch:
    Samen met onze partner Giertsen heeft Bredenoord een off-grid solar-based power plant bij een ziekenhuis in Somalië geïnstalleerd. De installatie maakt optimaal gebruik van zonne-energie in combinatie met een zuinig ingeregeld aggregaat.

    This item has broadcasted in Business-Africa.net journal no. 395

    http://www.bredenoord.com

    http://www.giertsen.com

    #offgridsolarbased
    #powerplant
    #powermogadishu

    Look for more information at: https://www.bredenoord.com/en/

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    WhatsApp Online Chat !