Discount wholesale Mono-Crystalline 200W Solar Panel Supply to Algeria

Short Description:


Product Detail

Product Tags

We are also focusing on improving the stuff management and QC system so that we could keep great advantage in the fiercely-competitive business for Discount wholesale Mono-Crystalline 200W Solar Panel Supply to Algeria, We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!


Mono-Crystalline 200W Solar Panel

Technical parameter

Maximum Power(W)                           200W

Optimum Power Voltage(Vmp)           37.29V

Optimum Operating Current(Imp)       5.36A

Open Circuit Voltage(Voc)                  45.48V

Short Circuit Current(Isc)                     5.89A

Mechanical Characteristics

Cell Type Monocrystalline                    125x125mm (5 inch)

No of Cell                                              72 (6x12pcs)

Dimensions                                          1580x808x35mm

Weight                                                  14.5Kg

Front Glass                                           3.2mm,High Transmission, Low Iron,Tempered Glass

Junction box                                         IP65 Rated

Output Cable                                        TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                -40°C ~ + 85°C

Maximum System Voltage:                  600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.47%

Temperature Coefficients of Voc:        -0.389%

Temperature Coefficients of Isc:           0.057%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Mono-crystalline solar cell 125*125mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Polycrystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • This solar shower design is so simple to make that ANYONE could put it together in no time. Plus it uses easy to find and mostly inexpensive materials. It would work great for anyone camping, in the event of an emergency that cuts off gas or water supplies (since it can be filled with rain water or at any lake or stream/ river), when remodeling an only bathroom in the house, to keep heat out of the house (and off of us in the summer heat) etc. Or just because it’s fun!

    Feel free to embed and link to these videos on your blog or website, when you do please credit frugalgreengirl. Thank You.



    We are very glad that Michael shared his installation for Lensun solar panels on his boat with us.

    http://www.lensunsolar.com

    1. He fixed the cable to one corner using a cable tie, then passed tape though the holes in each corner and stitched the tape to itself with UV resistant thread.

    2. The wiring lies on top of the awning and is held in place by Velcro next to the cable.

    3.The tape passes through webbing stitched to the awning and is pulled to the rear where it is fixed.  The panel cannot lift from the awning as it is held firmly at each corner.  Each webbing strip has a backing pad to provide additional strength.

    4.The wiring is attached to the backstay using velcro

    5.A waterproof Bulgin 7000 series Bucaneer plug and socket connect to the regulator beside the batteries.  He also have a 20A inline fuse at the battery to protect the wiring.

    All wiring above and below deck is HO7RN-F 2 core (4mm2) to provide abrasion and UV resistance. Connections to panel and plug are coated with Contralube 770. Joint between HO7RN-F wire and tail to panel connectors is soldered, coated with Contralube 770 and sealed in self-amalgamating tape.
     
    N.B.  The tape loops and Velcro cable ties make it easy to remove the panel when strong wind is forecast.  They would normally remove the panel if wind of more than 30kts is forecast.  However, that’s really to protect the awning rather than the panel and this only takes a few minutes.

    Please kindly let us know if you need any more information, You can contact us via email or call us in the following information from Monday to Friday.

    Contact information:

    http://www.lensunsolar.com

    Tel: UK: +44 2032875806 ,

    US: +1 (323) 2845027,

    China:+86 15759769602

    Whatsapp: +86 15759769602

    Skype: lensunsolar

    Email: [email protected] , [email protected]

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    WhatsApp Online Chat !