Chinese wholesale Poly-crystalline Solar Panel 60W Swedish Manufacturer
Short Description:
We support our buyers with ideal high quality products and high level service. Becoming the specialist manufacturer in this sector, we have gained rich practical experience in producing and managing for Chinese wholesale Poly-crystalline Solar Panel 60W Swedish Manufacturer, Competitive price with high quality and satisfying service make us earned more customers.we wish to work with you and seek common development.
Poly-crystalline Solar Panel 60W
Technical parameter
Maximum Power(W) 60W
Optimum Power Voltage(Vmp) 17.35V
Optimum Operating Current(Imp) 3.46A
Open Circuit Voltage(Voc) 21.16V
Short Circuit Current(Isc) 3.80A
Mechanical Characteristics
Cell Type Poly-crystalline 156 x 65mm
No of Cell 36 (4x9pcs)
Dimensions 678x657x35mm
Weight 5.0Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*65mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Get a great deal on Ebay:
http://rpon.us/t/B00DDZ6TBS
The Mototec Solar Electric Go Kart provides up to a 2 hour ride time with its integrated 4watt monocrystalline silicon panel on the rear wing that continuously recharges the go while in use. It’s powered by a 16ah 24v battery pack and 350 Dc motor that can reach speeds of 15mph. The also the go not in or with the charger in 4-6 hours. This go comes standard with 9 inch pneumatic tires for a variety of terrain and easy to disc brakes. This is a non-returnable item. Some Assembly is required.
This Is A Video Series Of Me Building A New Solar Off Grid Battery Bank Cabinet Fully Insulated ! It Will Hold 2 OutBack Nano Carbon 106 RE AGM Batteries ! The New Battery Bank Will Give Me A Total Of 200 Amp Hours Of Power My Old Battery Bank Was 180 Amp Hours And The Batteries Are Going On 9 Years Old Time To Replace Them ! This Cabinet I Built Will Hold 800 LBs With No Problem ! System Components 12 Volt Solar 340 Watt System And Zantrex Prowatt 2000 Watt Inverter And 200 Amp Hour Battery Bank in 12 Volt 340 Watts of Solar and OutBack Power Flexmax 80 MPPT Charge Controller And IOTA DLS 30 Amp AC Battery Charger
Many Thanks For Watching Please Subscribe God Bless And
Semper Fi
KVUSMC / Kenneth W Viar Jr
https://www.temcoindustrial.com/temco-hydraulic-cable-lug-crimper-th0005-11-us-ton-6-awg-to-600-mcm.html
https://www.altestore.com/store/
https://www.bluesea.com/
