China supplier OEM Mono-Crystalline 250W Solar Panel Cologne Factory
Short Description:
Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction for China supplier OEM Mono-Crystalline 250W Solar Panel Cologne Factory, Our aim is "blazing new ground, Passing Value", in the future, we sincerely invite you to grow up with us and make a bright future together!
Mono-Crystalline 250W Solar Panel
Technical parameter
Maximum Power(W) 250W
Optimum Power Voltage(Vmp) 30.3V
Optimum Operating Current(Imp) 8.29A
Open Circuit Voltage(Voc) 36.76V
Short Circuit Current(Isc) 8.91A
Mechanical Characteristics
Cell Type Monocrystalline 156x156mm (6 inch)
No of Cell 60 (6x10pcs)
Dimensions 1640x990x40mm
Weight 18.0KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Amazon-UK: http://npad.us/neck/2/uk/B008RN7VIG/review
40w Photonic Universe solar charging kit (solar panel, 5m cable, charge controller) This includes a monocrystalline made of high efficiency German cells (good output even without direct sunlight).
The is great for permanent outdoor use to provide free energy for a 12v battery (or bank) to then power lights, Tv, stereo, fridge etc such as in a camper van, boat, shed or farm.
Waterproof design ensures the can be used in all weather conditions.
The a 10a which uses Pwm technology to protect your batteries and extend their lifetime.
It has the full set of protection functions: reverse current, over charge, discharge, overload, overheating etc.
The also 5m of special attached to the with Mc4 connectors be cut off when wiring to the or for connecting an extension (not included).
characteristics: Peak power: Maximum voltage: 17.5v current: 2.22a Open circuit 21.6v Short 2.4a allowance range: +/3% Dimensions: 51 x 61 x 2.5 cm Weight: 4.2 kg 4 mounting for ease of installation 5m of quality 2.5mm cross section with 3 pairs of terminals (input, battery, output) for wires up to 6mm2 Leds to indicate charging, and Temperature sensor for automatic compensation (-30mv/c/12v) Self-consumption: 6ma Size: 14 x 6.5 x 3.5 cm 140 g 4 Detailed user manual for (explains and operations) Please note the might be dispatched in a separate package.
If need advice about this product do hesitate to contact us.
UNITED KINGDOM — One of the more overlooked marvels of the modern skyscraper is its plumbing system, which handles the very important job of managing the building’s waste.
British drainage expert Mark Briggs, while speaking to the Daily Mirror, explained how waste flushed from a height goes down at speeds of up to 122 mph as it hits terminal velocity.
The bottom of the pipe levels out to slow down the flow and minimize any bounce backs.
Buildings 20 or more storeys high also need to have separate stacks or pipes for toilets in the first two floors, to prevent anything from spewing out.
The design of a toilet system depends largely on the number of appliances, and the amount of fluids those appliances are expected to discharge.
Since skyscrapers produce more fluid discharge, its drain pipes need to be much wider than those in single family homes.
Pipes are typically made from PVC, but some buildings use cast iron for extra protection against rats, fires, and the sheer pressure of tons of human waste rushing through them.
—————————————-———————
Go to https://www.patreon.com/tomonews and become a Patron now
TomoNews is now on Patreon and we’ve got some cool perks for our hardcore fans.
TomoNews is your best source for real news. We cover the funniest, craziest and most talked-about stories on the internet. Our tone is irreverent and unapologetic. If you’re laughing, we’re laughing. If you’re outraged, we’re outraged. We tell it like it is. And because we can animate stories, TomoNews brings you news like you’ve never seen before.
Visit our official website for all the latest, uncensored videos: http://us.tomonews.com
Check out our Android app: http://bit.ly/1rddhCj
Check out our iOS app: http://bit.ly/1gO3z1f
Get top stories delivered to your inbox everyday: http://bit.ly/tomo-newsletter
See a story that should be animated? Tell us about it! Suggest a story here: http://bit.ly/suggest-tomonews
Stay connected with us here:
Facebook http://www.facebook.com/TomoNewsUS
Twitter @tomonewsus http://www.twitter.com/TomoNewsUS
Google+ http://plus.google.com/+TomoNewsUS/
Instagram @tomonewsus http://instagram.com/tomonewsus
