China Factory for Poly-crystalline Solar Panel 150W Factory from Slovenia
Short Description:
We thinks what customers think, the urgency of urgency to act in the interests of a customer position of principle, allowing for better quality, lower processing costs, prices are more reasonable, won the new and old customers the support and affirmation for China Factory for Poly-crystalline Solar Panel 150W Factory from Slovenia, We, with open arms, invite all interested buyers to visit our website or contact us directly for further information.
Poly-crystalline Solar Panel 150W
Technical parameter
Maximum Power(W) 150W
Optimum Power Voltage(Vmp) 17.92V
Optimum Operating Current(Imp) 7.83A
Open Circuit Voltage(Voc) 21.86V
Short Circuit Current(Isc) 8.59A
Mechanical Characteristics
Cell Type Poly-crystalline 156x156mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1482x678x35mm
Weight 11.9KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
www.PortableSolarPower.Biz
Here is a 36 watt folding thin film portable solar panel that is made with triple junction Unisolar Thinfilm solar cells which have very good performance under all weather conditions. Most solar cells produce less power as the temperature rises but the Unisolar cells are barley affected by high heat conditions which makes them produce more power than a comparable solar panel that is not made with Unisolar solar cells.
The solar panels are semi flexible and are very rugged and will hold up for a very long time if taken care of properly. I have a similar solar panel that has been outside for 4 straight years and it has held up very well and still produces its nominal rated output power.The Unisolar solar cells also have a very long rated lifespan, like 85% of their rated output for 25 years. Most other thin films do not hold up very well over the long haul.
These panels are flimsy and are very hard to tilt because they are not solid and this is why I prefer the folding mono crystalline solar panels since being able to tilt the solar panel perfectly towards the sun can increase the power output by 200% and the monocrystalline panels have a solid fiberglass backing sheet which allows then to be easily tilted up against something. But if you have to have a thin film solar panel I would recommend one made out of Unisolar thinfilm if the weight of the solar panel is not an issue since it will outperform most all other thinfilm foldable portable solar panels on the market from out testing.
The panel is waterproof.
The panels are available in these color patterns: Black, Digital Camo, Jungle Camo, Olive Drab Green.
Technical Parameters
Actual peak output power: 36W
Nominal output power: 32.4 W
Nominal output voltage: 18V
Nominal output current: 1.8
Open-circuit voltage: 24V
Short-circuit current: 2.4A
Size
Folded size: 15.35 x 5.90 x 1.57 Inches
Unfolded size: 56.10 x 30.15 x .02 Inches
Output interface
SAE 2 Pin Trailer Plug Connector
Weight:
3.5 Pounds
Certificate
CE, RoHs
Warranty
2 years
Product life time
Over 15 years
PARTE 2: https://www.youtube.com/watch?v=EEOBYulZ_fI
PARTE 3: https://www.youtube.com/watch?v=6mdBnIt0xIQ
Para 2 painéis de 240 watts cada:
#135 celulas solares 4w cada, total: 540 watts R$ 450.
(São 120 + 15 caso haja quebras)
#Pistola de aplicação + 2 Tubo De Silicone(300 ml) R$ 60.
#4 Solar-Tite(dois 384 e dois 7741-TE) R$ 100.
(ver modo de aplicar no ebay).
#2 Vidros Temperados 165 x 96 cm R$ 300.
(para Células de 6 x 6 = 156 x 156mm de Três faixas).
#10,5 metros Cantoneiras Alumínio R$ 100. (não polidas).
#Frete(Células e Solar-Tite) R$ 100.
TOTAL: R$ 1.110.
## Um Pronto no ML o mais barato de 245watts é R$ 999,
Dois R$ 2000 + 200 frete: TOTAL 2.200 ##
Obs: celula solar e solar-tite no ebay, cada painel solar
tem 10 linhas e 6 colunas de células.
DESENHO ESQUEMÁTICO:
http://www.flickr.com/photos/81952406@N02/7508641212/lightbox/
