China Factory for Mono-Crystalline 60W Solar Panel Factory in Cologne
Short Description:
We know that we only thrive if we can guarantee our combined price competiveness and quality advantageous at the same time for China Factory for Mono-Crystalline 60W Solar Panel Factory in Cologne, With superb service and quality, and an enterprise of foreign trade featuring validity and competitiveness, that will be trusted and welcomed by its clients and creates happiness to its employees.
Mono-Crystalline 60W Solar Panel
Technical parameter
Maximum Power(W) 60W
Optimum Power Voltage(Vmp) 18.46V
Optimum Operating Current(Imp) 3.25A
Open Circuit Voltage(Voc) 22.51V
Short Circuit Current(Isc) 3.57A
Mechanical Characteristics
Cell Type Mono-crystalline 125 x 83mm
No of Cell 36 (4x9pcs)
Dimensions 821x554x35mm
Weight 5.0Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*83mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Paket murah pompa air tenaga matahari.
Paket terdiri dari :
-Pompa DC 4-10Volt brusless, 20-150 liter/jam, semburan 10-150cm
-Panel surya 7v 1.2watt
-Asesoris mata semburan pompa
Pompa ini cocok buat aquarium, kolam kecil, hiasan dekorasi, hydroponik, dll.
Pompa tipe brusless yg tidak berisik seperti brushead. Kuat beroprasi 24 jam nonstop (heavy duty).
Harga Rp175rb saja.
I spotted this in TK Maxx today and spontaneously bought it to take to bits. Ronson is a generic tool brand in the UK so I guessed it might be fairly typical of a GU10 lamp even if it had the higher than usual 5W rating.
On the power meter it showed as just 3W! If you cheat and allow for reactive power then it could theoretically be classed as 5W but that’s not an optical power rating.
The front has a bezel that seems to be a friction fit and the lens behind it turned out to be glass (as you probably heard when I dropped it on the table.) Removal of the glass reveals a round PCB with 36 SMD LEDs wired in series on an aluminium core PCB which is glued to a concealed aluminium frame with a white rubbery thermal transfer adhesive.
The circuitry is mounted in the back and is accessed by removing two screws from the back of the lamp, which is quite unusual.
And here’s where I got a surprise! It was a traditional capacitive dropper as opposed to the more sophisticated switching circuitry often found in the higher wattage lamps. Here’s a breakdown of the circuitry.
Mains comes in and immediately goes through a 10 ohm resistor which limits inrush current and acts as a fuse. There’s a MOV (Metal Oxide Varistor) for transient protection, although it appears to be rated for 470V so it’s going to have to be quite a transient before it kicks in. One lead of the mains then goes directly to the rectifier (MB10S) while the other goes via a 560nF 400V capacitor with a 1M discharge resistor across it. The output of the rectifier has a 2.2uF 400V capacitor, a 330K resistor a mystery component (1328 XR) and the LED series string across it. As far as I can see the mystery component might be a high voltage zener diode, but finding data on it was not easy. The nearest I found was a 1N1327 with the mystery component possibly being the next voltage rating up.
So a pretty basic power supply, but quite rugged and neat. It does exhibit mild flicker though, and could have done with a higher value electrolytic on the output with maybe a series resistor between it and the LED string.