China Cheap price Mono-Crystalline 150W Solar Panel in Kazakhstan
Short Description:
We believe in: Innovation is our soul and spirit. Quality is our life. Customer need is our God for China Cheap price Mono-Crystalline 150W Solar Panel in Kazakhstan, Our tenet is 'Reasonable prices, efficient production time and best service .' We hope to cooperate with more customers for mutual development and benefits.
Mono-Crystalline 150W Solar Panel
Technical parameter
Maximum Power(W) 150W
Optimum Power Voltage(Vmp) 17.92V
Optimum Operating Current(Imp) 7.83A
Open Circuit Voltage(Voc) 21.86V
Short Circuit Current(Isc) 8.59A
Mechanical Characteristics
Cell Type Monocrystalline 156x156mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1485x668x35mm
Weight 11.6KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Saisonstart 2017
Alle Solarmodule sind mono haben zusammen 340 Watt mit einem Steca 2020 und einer 180 amp Batterie . Für mein Wohnzimmer um alles zu betreiben zu können reicht das völlig aus. Wechselr. 500 Watt Sinus. Viel Spass beim nachbauen.
Wenn es dir gefallen hat kannst du ja einen Daumen hoch oder ein Abo da lassen Danke.
I wanted a method to always keep my batteries fully charged and have the means to be able to reach full float voltage of 27.6vdc and then dump automatically to the grid and sell power until the batteries get down to about 26vdc. I was able to do this automatically by using a wind charge controller with dump load circuit and a 200 Amp battery isolator relay. The charge controller is adjustable so I can set at what voltage I want to dump the excess power (27.6vdc) and thus keep the panels always making power and pushing it to the batteries and grid. This happens now unattended in an automatic fashion and it is inexpensive and easy to do. With this design, my batteries are always fully charged and never “cycle” so they will last years and have full power when needed. The charge controller is from Coleman Air and the battery isolator relay I got from Amazon.
I get questions all the time about how much it costs to do something similar, so here it s. For just the solar you can do the same 4KW system for about $16,000 if you buy the components and do the labor yourself.
