Cheap PriceList for Poly-crystalline Solar Panel 150W Supply to Hanover

Short Description:


Product Detail

Product Tags

We have many excellent staff members good at marketing, QC, and dealing with kinds of troublesome problem in the production process for Cheap PriceList for Poly-crystalline Solar Panel 150W Supply to Hanover, Welcoming interested companies to cooperate with us, we look forward to having the opportunity of working with companies around the world for joint growth and mutual success.


Poly-crystalline Solar Panel 150W

Technical parameter

Maximum Power(W)                           150W

Optimum Power Voltage(Vmp)           17.92V

Optimum Operating Current(Imp)        7.83A

Open Circuit Voltage(Voc)                  21.86V

Short Circuit Current(Isc)                     8.59A

Mechanical Characteristics

Cell Type Poly-crystalline                    156x156mm (6 inch)

No of Cell                                            36 (4x9pcs)

Dimensions                                        1482x678x35mm

Weight                                                11.9KGS

Front Glass                                         3.2mm,High Transmission, Low Iron,Tempered Glass

Junction box                                        IP65 Rated

Output Cable                                      TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                 -40°C ~ + 85°C

Maximum System Voltage:                    600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.435%

Temperature Coefficients of Voc:        -0.35%

Temperature Coefficients of Isc:           0.043%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

 Materials of solar panel

1).Solar Cell——Poly-crystalline solar cell 156*156mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Poly-crystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • 12v solar panels 10w
    12v 10a pwm charge controller
    2 12v 40ah deep cycle battery
    12v 600w inverter pure sine wave



    Solar Thermal air heater! Easy DIY. this vid. is an overview of my latest solar air heater. the design uses an “air channel” design to force the air to travel a route well over 12 feet inside of the collector. as the air rises it’s heated to well over 150F. (tested w/outside temp in low 50′s). no metal cans needed for this one (but optional aluminum flashing strips can be added to further increase temps). *or for the reuse/recycle option, try crushed aluminum cans along the channel. air is pulled out of collector by a small thin case fan …and is run using a small solar panel (3 to 5 watt panel being the optimal size). the collectors surface area is roughly twice the size of any i’ve made so far (but it’s super-slim design still keeps it lightweight). *the full video (posted 3 days prior) with full “detailed building instructions” can be found on my youtube channel video page. couple of things: i designed the collector to be able to pull air from outside or inside. to pull air from inside home just hook up a second vent pipe onto the air inlet at the bottom and feed both tubes in. also note; due to the collectors slim design i used a very thin case fan to allow for proper airflow. (if you want to use a standard 25mm style case fan, consider using 2×3 or 2×4 lumber for max. airflow (and adjust the internal dowel sizes accordingly).

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    WhatsApp Online Chat !