Cheap price Poly-crystalline Solar Panel 250W Factory from Boston

Short Description:


Product Detail

Product Tags

We consistently carry out our spirit of ''Innovation bringing development, Highly-quality ensuring subsistence, Management promoting benefit, Credit attracting customers for Cheap price Poly-crystalline Solar Panel 250W Factory from Boston, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.


Poly-crystalline Solar Panel 250W

Technical parameter

Maximum Power(W)                           250W

Optimum Power Voltage(Vmp)           30.25V

Optimum Operating Current(Imp)       8.26A

Open Circuit Voltage(Voc)                  36.61V

Short Circuit Current(Isc)                     8.89A

Mechanical Characteristics

Cell Type Polycrystalline                      156x156mm (6 inch)

No of Cell                                              60 (6x10pcs)

Dimensions                                           1640x990x40mm

Weight                                                   18.5KGS

Front Glass                                            3.2mm,High Transmission, Low Iron,Tempered Glass

Junction box                                          IP65 Rated

Output Cable                                         TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):               -40°C ~ + 85°C

Maximum System Voltage:                  600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.47%

Temperature Coefficients of Voc:        -0.389%

Temperature Coefficients of Isc:           0.057%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

 Materials of solar panel

1).Solar Cell——Polycrystalline solar cell 156*156mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Poly-crystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • Soldering a flex wire to a single solar cell to be used as a detector. Some tips and tricks to make it faster and easier while lowering the chance of cracking the cell. (This is not the same as building a solar panel.)

    MATERIALS
    - Soldering iron (less than 50 watts, clean)
    - Fine solder is best (clean)
    - Thin, flexible wire (clean)
    - Cell

    WARNINGS:
    - Soldering can be dangerous. If you do not know soldering safety, learn it or don’t solder.
    - Never solder live circuits of any type.
    - Soldering house wiring, power wiring, etc. is outside the scope of this video. That should be left to professionals only.
    - Electricity can cause damage, fires, burns and death. If you don’t know about electricity, learn before doing.
    - These are demonstrated for hobby work, low voltage – low amperage applications. NOT for mains voltages or currents or similar.
    - Never use lead type solders where it will come in contact with food or drink or where it will come in regular contact with people.
    - Lead is toxic. Take care to ensure that the byproducts / waste are contained and disposed of properly. Never hold solder in your mouth. Have proper ventilation.
    - This is for hobby soldering only. Industrial users have more stringent requirements for industrial or large scale soldering operations.
    - This is not all inclusive. If you don’t know, get training before continuing.

    SOLDERING VIDEOS & RELATED
    Soldering Basics – Popular Connections

    Soldering Tools – DIY Clamps

    Soldering -Taping & Shrinkwrap

    Soldering Basics – For Cars, Experimenting, DIY’ers, Boats, Solar, …

    Soldering – Water Resistant Connections, for Boats, Cars, RVs, Trailers, etc.

    DIY Third Hand For Soldering, Gluing, Hobby Work, etc.

    Soldering Closely Spaced Leads, Wires, Connections – Soldering Tip 2

    Solding a Fine Wire to a Solar Cell

    Salvaging Threaded Brass Inserts

    Soldering Above or Below, Which is Right / Wrong



    Dokumentasi Project Kerjasama antara Yayasan Energi Bersih Indonesia dengan ICCTF ( Indonesian Climate Change Trust Fund) Bappenas untuk pembangunan Solar Water Pump System di Banyumeneng 2.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Car

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree

    WhatsApp Online Chat !