Best-Selling Poly-crystalline Solar Panel 50W for Wellington
Short Description:
Always customer-oriented, and it's our ultimate target to be not only the most reliable, trustable and honest supplier, but also the partner for our customers for Best-Selling Poly-crystalline Solar Panel 50W for Wellington, we are seeking for extensive cooperation with honest customers, achieving a new cause of glory with customers and strategic partners.
Poly-crystalline Solar Panel 50W
Technical parameter
Maximum Power(W) 50W
Optimum Power Voltage(Vmp) 18.43V
Optimum Operating Current(Imp) 2.71A
Open Circuit Voltage(Voc) 22.48V
Short Circuit Current(Isc) 2.98A
Mechanical Characteristics
Cell Type Poly-crystalline 156 x 52mm
No of Cell 36 (4x9pcs)
Dimensions 678x542x25mm
Weight 4.2Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*52mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
In this video I show you how can make a Do It Yourself Solar Panel Stand for less than $10. It is made of 1/2″ PVC Plumbing Tubing that can be purchased at your local hardware store, and is built using very simple hand tools.
Share this Video
Subscribe To My Channel and Get More Great Tips
http://www.youtube.com/subscription_center?add_user=ncprepper100
Link to My Amazon Solar Store
http://astore.amazon.com/ncpr06-20?_encoding=UTF8&node=4
This is a super simple Solar Panel Stand that I show you how to make in about 30 minutes with simple hand tools and for less than $10. The only tools that you will need is a hacksaw and a pencil. There are not really any measurements as you will need to customize the stand for your particular solar panel. There is not any glue in this stand as the friction and the panel being wire-tied to the braces will hold the stand together. I even add some eyelet bolts for you to be able to stake the stand down to help keep it from being blown over in hard winds.
If you found this video useful, please give me a thumbs up, and also please tell your friends, and please subscribe.
Thanks for watching!!
Follow me
https://www.facebook.com/pages/NC-Prepper/
https://twitter.com/ncpreppergroup
Subscribe To My Channel and Get More Great Tips
http://www.youtube.com/subscription_center?add_user=ncprepper100