Best-Selling Mono-Crystalline 300W Solar Panel Export to Brazil
Short Description:
Innovation, quality and reliability are the core values of our company. These principles today more than ever form the basis of our success as an internationally active mid-size company for Best-Selling Mono-Crystalline 300W Solar Panel Export to Brazil, We warmly welcome your participation based on mutual benefits in the near future.
Mono-Crystalline 300W Solar Panel
Technical parameter
Maximum Power(W) 300W
Optimum Power Voltage(Vmp) 37.45V
Optimum Operating Current(Imp) 8.15A
Open Circuit Voltage(Voc) 45.60V
Short Circuit Current(Isc) 8.91A
Mechanical Characteristics
Cell Type Monocrystalline 156x156mm (6 inch)
No of Cell 72 (6x12pcs)
Dimensions 1950x990x50mm
Weight 22.1Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Hear from IBEW Local 474 members in Memphis, TN on why they are proud to produce Sharp solar modules.
According to the recent guideline documents released by some of the Australian utilities, solar systems installed may be required to have either reactive power control or zero export to the grid.
Depending on the utility requirement, active power limitation or zero export is not necessary providing the inverter has reactive power control capability.
If your utility requires your system to be on zero export, you can use SMA inverters each equipped with a power control module in conjunction with a third party programmable logic controller (PLC). Please note that one PLC signal can support up to 5 inverters.
Adrian Ho, SMA Australia’s Solar Academy trainer shows how you can use SMA products to meet these utility requirements.
SMA Australia – https://www.SMA-Australia.com.au
SMA Corporate Blog – https://www.en.SMA-Sunny.com
SMA Australia on Facebook – https://www.facebook.com/SMA.Aus
SMA Australia on Twitter – https://www.twitter.com/SMA_Australia
Contact – [email protected]
SMA Solar Technology AG is a global leader in the development, production and sales of PV inverters and, as an energy management group, offers innovative key technologies for future power supply structures.