Best quality and factory Poly-crystalline Solar Panel 60W Manufacturer in Barbados
Short Description:
We insist on the principle of development of 'High quality, Efficiency, Sincerity and Down-to-earth working approach' to provide you with excellent service of processing for Best quality and factory Poly-crystalline Solar Panel 60W Manufacturer in Barbados, It is our great honor to meet your demands.We sincerely hope we can cooperate with you in the near future.
Poly-crystalline Solar Panel 60W
Technical parameter
Maximum Power(W) 60W
Optimum Power Voltage(Vmp) 17.35V
Optimum Operating Current(Imp) 3.46A
Open Circuit Voltage(Voc) 21.16V
Short Circuit Current(Isc) 3.80A
Mechanical Characteristics
Cell Type Poly-crystalline 156 x 65mm
No of Cell 36 (4x9pcs)
Dimensions 678x657x35mm
Weight 5.0Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*65mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
This is a video of my 2012-2013 Science Fair project. It shows how copper solar cells were made for my experiment. In this part of the experiment, copper was heated on high for 15 minutes and cooled for 30 minutes. During the heating time, cuprous oxide formed on the copper. After that, a layer of black cupric oxide formed on top of the cuprous oxide. As the copper cooled, some of the cupric oxide flaked off, revealing light orange cuprous oxide underneath. This cuprous oxide was used to convert light energy to electricity in my solar cells.
In diesem Video wird davor der Energieinhalt des Akkupacks von 12,5Wh bestimmt. Anschließend wird es mit einem 40 Watt Ventilator belastet und die Zeit gemessen. 7 Zellen mit jeweils 500mAh halten im Test circa 15min bei 40 Watt Leistung durch, was einen Energieinhalt von 10Wh ergibt.
Dabei handelt es sich um schlechte Zellen mit niedriger Kapazität.
Die für meinen späteren Hausspeicher selektierten Zellen haben gut die 4-fache Kapazität, also um die 2000mAh.
Original Samsung 18650 Li-Ion Akku: http://amzn.to/1Ma4VWX
Preiswertes Multimeter für Einsteiger: http://amzn.to/1LauoLM
