90% OFF Price For Mono-Crystalline 100W Solar Panel Manufacturer in St. Petersburg

Short Description:


Product Detail

Product Tags

As a result of ours specialty and service consciousness, our company has won a good reputation among customers all over the world for 90% OFF Price For Mono-Crystalline 100W Solar Panel Manufacturer in St. Petersburg, We encourage you to make contact as we are looking for partners in our venture. We are sure you will find doing business with us not only fruitful but also profitable. We are ready to serve you with what you require.


Mono-Crystalline 100W Solar Panel

Technical parameter

Maximum Power(W)                        100W

Optimum Power Voltage(Vmp)        18.66V

Optimum Operating Current(Imp)    5.36A

Open Circuit Voltage(Voc)               22.72V

Short Circuit Current(Isc)                 5.92A

Mechanical Characteristics

Cell Type Monocrystalline              125x125mm(5 inch)

No of Cell                                        36 (4x9pcs)

Dimensions                                     1200x554x35mm

Weight                                             7.8Kg

Front Glass                                     3.5mm,High Transmission, Low Iron,Tempered Glass

Junction box                                    IP65 Rated

Output Cable                                   TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):               -40°C ~ + 85°C

Maximum System Voltage:                  600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.47%

Temperature Coefficients of Voc:        -0.389%

Temperature Coefficients of Isc:           0.057%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Mono-crystalline solar cell 125*125mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Polycrystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • http://www.solardave.com/index.php/do-solar-panels-increase-the-chance-of-a-lightning-strike-video/
    This is my 9th video interview with Tony Boniface President of Independent Power Systems filmed in Colorado.

    SolarDave: Do solar panels increase the risk of a lightning strike?

    Tony Boniface: Quick answer is yes. Anytime you put metal anywhere you are increasing the risk of a lightning strike.

    In terms of being concerned about it, there are very little reports about panels getting struck.

    A properly grounded system will minimize the likelihood of that happening. Has not been a problem and yes it will increase the likelihood. I would not be concerned about it.

    2008 national code however is going to require that every single solar system have a lightning ground, so interestingly, if code thinks it is necessary they must be some issues going on. Or they are concerned once they is a substainal number of systems out there it could start having an impact and they need to be a little concerned with that.

    SolarDave: You think like a lightning arrestor?

    Tony Boniface: Nope, they want you to run a minimum No. 6 AWG copper wire off the array straight down to an auxilary ground rod which they are calling a lightning rod and unlike the rest of the grounding system it doesn’t necessary need to be tied to the rest of the ground system – they are considering a separate lightning ground.



    Đính chính: Tấm pin hấp thu ánh sáng (quang năng) chuyển đổi thành điện năng chứ không phải hấp thu nhiệt rồi chuyển thành quang như bạn thuyết minh trong video này nói nhé.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Truck

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Car

    WhatsApp Online Chat !