9 Years Factory Poly-crystalline Solar Panel 300W for Oman Factory
Short Description:
Our development depends on the advanced equipment, excellent talents and continuously strengthened technology forces. 9 Years Factory Poly-crystalline Solar Panel 300W for Oman Factory, sincerely look forward to serving you in the near future. You are sincerely welcome to visit our company to talk business face to face with each other and establish long-term co-operation with us!
Poly-crystalline Solar Panel 300W
Technical parameter
Maximum Power(W) 300W
Optimum Power Voltage(Vmp) 37.15V
Optimum Operating Current(Imp) 8.08A
Open Circuit Voltage(Voc) 45.30V
Short Circuit Current(Isc) 8.87A
Mechanical Characteristics
Cell Type Poly-crystalline 156x156mm (6 inch)
No of Cell 72 (6x12pcs)
Dimensions 1956x992x50mm
Weight 22.5Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Guy who did some tests
http://www.builditsolar.com/Projects/Conservation/bubblewrapperformance.htm
My claim here that placing bubble wrap on a single pane window results in an efficiency gain somewhere between untreated window, and a cheap thermopane seems pretty obvious. What I meant was that the results of my not-too-scientific study were that numbers seemed to post in the center between an entirely different thermopane window, and the untreated single pane window.
This is my visual thinking final project. I wanted to create a solar powered bobble head. unfortunately, i messed up on one step, and that’s adding a second battery and not putting clay over the other magnet. But is easily fixed. Just make sure you put negative and negative side together so that the one can pull and push to turn the magnet on and off. Remember it needs to reject something for the magnet to swing back and forth. Thanks! hope you learned something from my video! lets see what kind of bobble heads you can make!