9 Years Factory Mono-Crystalline 80W Solar Panel for Jordan Manufacturers

Short Description:


Product Detail

Product Tags

We have a professional, efficiency team to provide quality service for our customer. We always follow the tenet of customer-oriented, details-focused for 9 Years Factory Mono-Crystalline 80W Solar Panel for Jordan Manufacturers, We stick to providing integration solutions for customers and hope to build long-term, stable, sincere and mutual beneficial relationships with customers. We sincerely look forward to your visit.


Mono-Crystalline 80W Solar Panel

Technical parameter

Maximum Power(W)                        80W

Optimum Power Voltage(Vmp)        15.90V

Optimum Operating Current(Imp)    5.03A

Open Circuit Voltage(Voc)               18.58V

Short Circuit Current(Isc)                 5.59A

Mechanical Characteristics

Cell Type Monocrystalline               125x125mm (5 inch)

No of Cell                                         36 (4x9pcs)

Dimensions                                     906x670x35mm

Weight                                             7.2KGS

Front Glass                                     3.2mm,High Transmission, Low iron, tempered Glass

Junction box                                    IP65 Rated

Output Cable                                   TUV 1×4.0mm2/UL12AWG,Length: 900mm

Temperature and Coefficients

Operating Temperature(°C):                -40°C ~ + 85°C

Maximum System Voltage:                  600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.435%

Temperature Coefficients of Voc:        -0.35%

Temperature Coefficients of Isc:           0.043%

Nominal Operating Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Mono-crystalline solar cell 125*125mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Polycrystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • Transcript:
    Hello, Mel Radford with GoSol Energy here to chat to you currently about firefly specifically about the solar panel that comes within the firefly package. It is a 20 Watt panel, polycrystalline. You will find a couple factors that you have to have to know about this panel. Variety one, this panel’s entirely water-resistant. Indeed, you can put it outdoors. you can mount it on your roof or you can set it outdoors. Indeed, you can get it soaked. This is not plastic. This is glass, which lets us to have a twenty five 12 months assurance. Functionality assurance for twenty five many years, this will continue on to ability your firefly reliably. Aluminum framing, 5 meters of wire so that you can put it everywhere you want both on your roof or once again just outdoors carry it in at night time and it is a legitimate 20 Watt panel. It will give you 20 W above the existence once again twenty five many years of this panel. So, solar panel technological know-how, Firefly, from GoSol Energy. Thank you.



    I installed two 100 watt Renogy Polycrystalline solar panels on the roof. I used some angle aluminum to assemble into C-channel. The roof was coated in liquid EPDM rubber roof. I cut squares of the EPDM coating where the C-channel will contact the fiberglass roof. I cleaned the area and glued the C-channel down using 3M 5200 fast cure.

    I also installed a backup camera system. I bought two sets of the transmitter/receiver so I can view through 2 monitors. Both transmitter receiver kits i got use frequency 2370. I did buy the kits a week apart from each other.

    3M 5200 fast cure

    http://www.amazon.com/gp/product/B003…

    Digital voltage meter

    http://www.amazon.com/gp/product/B013…

    Renogy Solar Panels

    http://www.amazon.com/Renogy-Polycrys…

    Just because I really think Renogy makes an outstanding product I went with their fuse and pre -terminated PV wires.

    Fuse

    http://www.amazon.com/gp/product/B00Y…

    PV wires

    http://www.amazon.com/gp/product/B00J…

    Solar Controller

    http://www.solarhome.org/smartharvest…

    Surface Mount Weather Cap

    http://www.amazon.com/gp/product/B008…

    Backup camera

    http://www.amazon.com/Esky-EC170-06-W…

    Wireless transmitter and Receiver

    http://www.amazon.com/gp/product/B00R…

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup

    WhatsApp Online Chat !