80% OFF Price For Poly-crystalline Solar Panel 100W Supply to San Francisco
Short Description:
Sticking to the principle of "Super Quality, Satisfactory service" ,We are striving to be a good business partner of you for 80% OFF Price For Poly-crystalline Solar Panel 100W Supply to San Francisco, Please send us your specifications and requirements, or feel free to contact us with any questions or inquiries that you may have.
Technical parameter
Maximum Power(W) 100W
Optimum Power Voltage(Vmp) 17.87V
Optimum Operating Current(Imp) 5.60A
Open Circuit Voltage(Voc) 21.45V
Short Circuit Current(Isc) 6.17A
Mechanical Characteristics
Cell Type Polycrystalline 156x104mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1120x678x35mm
Weight 9.7KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Polycrystalline solar cell 156*52mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
The solar cells I used are 800mA photovoltaic and as you can see are not very efficient – I doubt if they are more than 10% efficient. Most of the ‘light energy’ falling on them is transferred to heat or reflected instead of being ‘turned into’ electricity. But that’s why its useful having toys like this so that pupils can learn about the challenges associated with harnessing alternative energy supplies.
Even with sunshine the small size of these solar cells will always limit the amount of electricity generated. The motor will spin much more easily mounted vertically – see my ‘solar-powered zoetrope’ video in this series.
All of the materials and components used are available from my supply service (UK only) and the solar car is also available as a kit.
Details at www.slstc.southwarklea.org.uk
100 watts Poly 150 watts Mono Solar Panels with