80% OFF Price For Mono-Crystalline 150W Solar Panel Manufacturer in Switzerland

Short Description:


Product Detail

Product Tags

Innovation, quality and reliability are the core values of our company. These principles today more than ever form the basis of our success as an internationally active mid-size company for 80% OFF Price For Mono-Crystalline 150W Solar Panel Manufacturer in Switzerland, We always welcome new and old customers presents us with valuable advice and proposals for cooperation, let us grow and develop together, and to contribute to our community and staff!


Mono-Crystalline 150W Solar Panel

Technical parameter

Maximum Power(W)                            150W

Optimum Power Voltage(Vmp)            17.92V

Optimum Operating Current(Imp)        7.83A

Open Circuit Voltage(Voc)                   21.86V

Short Circuit Current(Isc)                     8.59A

Mechanical Characteristics

Cell Type Monocrystalline                 156x156mm (6 inch)

No of Cell                                            36 (4x9pcs)

Dimensions                                       1485x668x35mm

Weight                                                 11.6KGS

Front Glass                                        3.2mm,High Transmission, Low Iron,Tempered Glass

Junction box                                       IP65 Rated

Output Cable                                     TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                 -40°C ~ + 85°C

Maximum System Voltage:                    600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.435%

Temperature Coefficients of Voc:        -0.35%

Temperature Coefficients of Isc:           0.043%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Mono-crystalline solar cell 156*156mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Polycrystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • http://www.SolarEnergyGuide.net – How to Make a Homemade Solar Panel
    Solar panels, unlike before, are cheap and easy to install with great efficiency. With this advent, you

    can save big money as well as help save the environment. A DIY kit is available and has an easy to

    follow instruction with them. What you need is some simple tools and you’re done.

    Here is your guide to make a homemade solar panel:

    1. First, you must know the loads of your solar panel and the package that is affordable to you. One

    watt of solar panel module will coast you about $25 and a 200 watts module is around $1000. If you need

    more power, you can connect this to form a collector to produce your desired power needs. Electrical

    connections are made in series to achieve a desired output voltage and/or in parallel to provide a

    desired amount of current capability.

    2. After selecting the solar panel modules, you need a charge controller which is an important system

    component that regulates the voltage generated by the solar panel. This will regulate your power and

    provide protection to the batteries from being over or under-charged.

    3. Next, you need a solar inverter this will convert 12 volt DC (direct current) from solar panel to 125

    volts AC (alternating current) which will feed your appliances. Some high end inverters combine an

    inverter, battery charger and dual transfer switch in one package.

    4. Batteries are needed if there is no sun or there is a blackout in your area. Typically, lead acid

    batteries are use because of performance and cost. Newer lead-acid battery is called maintenance free

    and this does not require water addition, but this is expensive. The battery is one of the first

    components of your solar panel to be replaced. Usually, a battery can have 200 to 300 charge/discharge

    cycle because of corrosion and depletion of active materials. So, be prepared to change batteries in

    about a year. Typical price of batteries ranges from 100 to 500 dollars.

    5. Also, you must consider the battery enclosure as this are toxic and can explode. Solar PV

    (Photovoltaic) Panel Mounting System is where your panel will be installed. You can choose either at the

    roof, pole, or at the ground. There are so many designs to choose from and some have motors to track the

    sun.

    6. The last, but certainly the most important one, is that make sure to have your wire connection

    checked by qualified technician. Faulty electrical wiring is the most common fire hazard today.

    Now that you know how to make a homemade solar panel, you can now start this DIY project with ease. It’s

    affordable and simple without having to worry about your monthly expenditure on electricity anymore.

    You can definitely save money and the environment by making a homemade solar panel at your own home. It

    is a fun, enriching, and worthy project to undertake.

    If you want to know more about the easy and step-by-step guide on building and installing your own solar

    panels at home, just Click Here.
    How to Make a Homemade Solar Panel How to Make Homemade Solar Panel advantages alternative benefits bill

    build cell cells cheap conservation cost costs diy earth earth4energy earthenergy efficiency efficient

    electric electricity eliminate energy environment free fuel generate generator global green grid heat

    heater help home homemade house how instructions kits live make manufacturer market money natural panel

    panels plant power renewable residential resources review save scam sell solar sun system



    Eco worthy 100w Monocrystalline solar panel.
    Just a quick look (this time) of the Eco worthy 100w Solar Panel.
    I can tell you it produces just over 5 Amps in good sun light.
    More to follow on this as i get to compare it to my other panels in different weather conditions and sun shine.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Car

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Star

    WhatsApp Online Chat !