8 Years manufacturer Poly-crystalline Solar Panel 150W for Bolivia Factories
Short Description:
With a positive and progressive attitude to customer's interest, our company continuously improves our product quality to meet the needs of customers and further focuses on safety, reliability, environmental requirements, and innovation of
8 Years manufacturer Poly-crystalline Solar Panel 150W for Bolivia Factories, All the opinions and suggestions will be greatly appreciated! The good cooperation could improve both of us into better development!
Poly-crystalline Solar Panel 150W
Technical parameter
Maximum Power(W) 150W
Optimum Power Voltage(Vmp) 17.92V
Optimum Operating Current(Imp) 7.83A
Open Circuit Voltage(Voc) 21.86V
Short Circuit Current(Isc) 8.59A
Mechanical Characteristics
Cell Type Poly-crystalline 156x156mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1482x678x35mm
Weight 11.9KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
A complete production line for the assembly of LED panels, the LED-AP1200 includes a fully automatic stencil printer, a pick and place machine designed specifically for LED assembly, and a full-convection, 6-zone reflow oven. This line can assemble LED panels up to 1.2 meters (47″) long with LED placement rates of approximately 15,000 cph. The complete line also includes an inspection conveyor to connect the MC-LEDV4 pick and place machine with the CR-6000 reflow oven.
Get pricing on this complete production line for LED assembly at https://www.manncorp.com/led-ap1200-automated-led-assembly-line.html
Homemade Solar Charger – For Mobile Cell Phone, Power bank & Drone Batteries.
_______________________________
Made using:
Plastic backboard – Salvaged from broken TV screen. (£0)
Solar Panels – 6v 1w (99p each from Ebay)
Wires – 0.6mm solid core tinned copper 1.8 A @ 1,000V RMS max (£1.10 for 13 meters. Ebay) (less than 1m used = 8p)
USB Charger DC-DC Step-down Buck Converter Voltmeter Module DC 4.5-40V To 5V 2A (£1.33. Ebay)
5V Mini USB 1A TP4056 Lithium Battery Charging Board Power Charger Module (£2.77 for 10. Ebay) (27p each) (1 used = 27p)
JST Connector Plugs (99p for 10 pairs. Ebay) (6 used = 30p)
Power Bank (Vinsic Tulip 3200mAh) (£3.20. Ebay auction)
Breadboard 830 (£1.19. Ebay)
Diodes – 1A 50v (99p for 100. Ebay) (6 used = 6p)
Total = £12.37
_A___r___d___u___i___n___0___x_
