8 Years Factory Poly-crystalline Solar Panel 90W Manufacturer in Vancouver

Short Description:


Product Detail

Product Tags

We insist on the principle of development of 'High quality, Efficiency, Sincerity and Down-to-earth working approach' to provide you with excellent service of processing for 8 Years Factory Poly-crystalline Solar Panel 90W Manufacturer in Vancouver, We are sincere and open. We look forward to your visit and establishing trustworthy and long-term standing relationship.


Poly-crystalline Solar Panel 90W

Technical parameter

Maximum Power(W)                        90W

Optimum Power Voltage(Vmp)        18.33V

Optimum Operating Current(Imp)    4.91A

Open Circuit Voltage(Voc)               21.96V

Short Circuit Current(Isc)                 4.89A

Mechanical Characteristics

Cell Type Poly-crystalline                 156x104mm (6 inch)

No of Cell                               36 (4x9pcs)

Dimensions                           1008x678x35mm

Weight                                   8.0KGS

Front Glass                           3.2mm,High Transmission, Low Iron,Tempered Glass

Junction box                                    IP65 Rated

Output Cable                                   TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                -40°C ~ + 85°C

Maximum System Voltage:                  600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.435%

Temperature Coefficients of Voc:        -0.35%

Temperature Coefficients of Isc:           0.043%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

 Materials of solar panel

1).Solar Cell——Poly-crystalline solar cell 156*104mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Poly-crystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • Sunmaxx 30 evacuated tube heat pipe with butler heat dump and butler wand. This system provides about 90% of our hot water needs.
    Solar thermal energy (STE) is a technology for harnessing solar energy for thermal energy (heat). Solar thermal collectors are classified by the United States Energy Information Administration as low-, medium-, or high-temperature collectors. Low-temperature collectors are flat plates generally used to heat swimming pools. Medium-temperature collectors are also usually flat plates but are used for heating water or air for residential and commercial use. High-temperature collectors concentrate sunlight using mirrors or lenses and are generally used for electric power production. STE is different from and much more efficient than[1][2][3] photovoltaics, which converts solar energy directly into electricity. While existing generation facilities provide only 600 megawatts of solar thermal power worldwide in October 2009, [note 1] plants for an additional 400 megawatts are under construction and development is underway for concentrated solar power projects totalling 14,000 megawatts.[4]
    More energy is contained in higher frequency light based upon the formula of , where h is the Planck constant and is frequency. Metal collectors down convert higher frequency light by producing a series of Compton shifts into an abundance of lower frequency light. Glass or ceramic coatings with high transmission in the visible and UV and effective absorption in the IR (heat blocking) trap metal absorbed low frequency light from radiation loss. Convection insulation prevents mechanical losses transferred through gas. Once collected as heat, thermos containment efficiency improves significantly with increased size. Unlike Photovoltaic technologies that often degrade under concentrated light, Solar Thermal depends upon light concentration that requires a clear sky to reach suitable temperatures.
    Heat in a solar thermal system is guided by five basic principles: heat gain; heat transfer; heat storage; heat transport; and heat insulation.[69] Here, heat is the measure of the amount of thermal energy an object contains and is determined by the temperature, mass and specific heat of the object. Solar thermal power plants use heat exchangers that are designed for constant working conditions, to provide heat exchange.
    Heat gain is the heat accumulated from the sun in the system. Solar thermal heat is trapped using the greenhouse effect; the greenhouse effect in this case is the ability of a reflective surface to transmit short wave radiation and reflect long wave radiation. Heat and infrared radiation (IR) are produced when short wave radiation light hits the absorber plate, which is then trapped inside the collector. Fluid, usually water, in the absorber tubes collect the trapped heat and transfer it to a heat storage vault.
    Heat is transferred either by conduction or convection. When water is heated, kinetic energy is transferred by conduction to water molecules throughout the medium. These molecules spread their thermal energy by conduction and occupy more space than the cold slow moving molecules above them. The distribution of energy from the rising hot water to the sinking cold water contributes to the convection process. Heat is transferred from the absorber plates of the collector in the fluid by conduction. The collector fluid is circulated through the carrier pipes to the heat transfer vault. Inside the vault, heat is transferred throughout the medium through convection.
    Heat storage enables solar thermal plants to produce electricity during hours without sunlight. Heat is transferred to a thermal storage medium in an insulated reservoir during hours with sunlight, and is withdrawn for power generation during hours lacking sunlight. Thermal storage mediums will be discussed in a heat storage section. Rate of heat transfer is related to the conductive and convection medium as well as the temperature differences. Bodies with large temperature differences transfer heat faster than bodies with lower temperature differences.
    Heat transport refers to the activity in which heat from a solar collector is transported to the heat storage vault. Heat insulation is vital in both heat transport tubing as well as the storage vault. It prevents heat loss, which in turn relates to energy loss, or decrease in the efficiency of the system.



    Flexible Solar Panel – https://goo.gl/CGDVyD

    If this Video Reach 1000 Likes we will Give Away !

    Flexible Solar Panel Review Monocrystalline Polycrystalline Lightweight for RV Boat ThinkUnBoxing

    1. Specification:
    Material:Monocrystalline silicon Glass fiber Laminated board
    Power:20W
    Working Voltage: 18V
    Working Current: 1.2A
    Conversion rate: 17%
    Size:450*350*5mm L*W*H
    Weight: 579g
    2. Application:
    Charge batteries, Water pumps, RV battery, Garden lights, Venting fans, etc.
    Package include:
    1 x 20W Solar Panel
    1 x Power cable

    30 Watt solar panel provides up to 30 watts of clean, free, renewable power
    Designed for maintaining 12 volt batteries in RVs, cabins, boats, battery operated gates, back-up power and remote power use
    Perfect for 12 volt battery charging (see pictures in photo gallery for solar panel technical specifications and dimensional drawings)
    30W solar panel can provide 100-200 Watt Hours of power per day (depends on sunlight availability)
    Grade A solar cells; Heavy duty anodized aluminum frame, 5 year warranty on parts and labor, Delivered ready for connection!
    Included with your purchase is one WindyNation 30 Watt solar panel. It is recommened that a charge controller is used when charging a 12 volt battery with a 30 Watt solar panel. A charge controller and cable to connect the solar panel to the charge controller are NOT included with your purchase. We do sell a Complete 30W Solar Panel kit on Amazon that includes all these items — The Windy Nation 30 Watt Solar Panel allows you to start producing free, clean power from the sun! Perfect for keeping 12 volt batteries charged on RV’s, boats, ATV’s, cabins and any other situation where you need to keep a 12 volt battery charged up and ready for use! All of WindyNation’s solar panels come with a standard five year warranty on parts on labor. Additionally, WindyNation’s solar panels carry a 25 year power warranty which guarantees the solar panel will produce 80% of its rated power output after 25 years

    The Flexible 100 Watt 12 Volt Monocrystalline Light Weight Solar Panel uses advanced SunPower monocrystalline cells that have been laminated into a thin plastic sheet. The result is a solar panel that is far more durable and efficient than traditional glass and aluminum models.
    Weighing in at a mere 5 pounds, this panel is great for stealth and effortless to transport, hang, remove, or use for non-permanent applications. Also, unlike traditional panels, while this panel may be damaged by sharp objects or scraping, there is no risk of shattering or cracking.

    High conversion efficiency, long service life, to ensure full power.
    The unique process component, beautiful and strong anti snow, convenient installation.
    Aging resistance, corrosion resistance, weak light effect.
    Suitable for all kinds of small power appliances, emergency lights, advertising lights, traffic lights, home lights, electric fans, such as solar water pumps, solar street lights, small solar systems, etc.

    Specifications:

    Size: Approx. 540 x 350mm/21.2″ x 13.7″
    Length of alligator clip wire: Approx. 4m/157″
    Power: 30W (Only under the condition of Intensity = 1000W/㎡, temperature=25°, pressure=1.5Pa)
    Working voltage: 12V
    Weight: 600g

    Package includes:

    1 x 12V 30W Solar panel

    Specifications:
    Maximum Power: 100W
    Maximum System Voltage: 600V DC (UL)
    Optimum Operating Voltage (Vmp): 17.7V
    Optimum Operating Current (Imp): 5.70A
    Open-Circuit Voltage (Voc): 21.7V
    Short-Circuit Current (Isc): 6.10A
    Dimensions: 41.7 X 21.3 X 0.12 inches
    Weight: 5.25lbs

    18 Volt 12 Volt Monocrystalline polycrystalline Lightweight Solar Panel for RV/ Boat/ Other

    Hello,

    We do Unboxing and Review With Full 4K Cam with Multiple Angles
    We can provide you Full Review and Exposure for Free
    All You Have To Do is To Send us the Product and we will give honest and good Review

    you can subscribe to us to see our work

    Thank you

    ThinkUnBoxing.com
    8011 jarry est
    Anjou , Quebec , Canada
    H1J1H6
    1-888-374-5155

    FOLLOW US for More Updates
    Twitter – https://twitter.com/ThinkUnboxing
    Facebook – https://www.facebook.com/ThinkUnboxing/
    Pinterest – https://www.pinterest.com/thinkunboxing/
    Google Plus – https://plus.google.com/108100530423637634183
    Instagram – https://www.instagram.com/thinkunboxing/

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the House

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    WhatsApp Online Chat !