8 Years Factory Poly-crystalline Solar Panel 200W Manufacturer in Sierra Leone

Short Description:


Product Detail

Product Tags

Our development depends on the advanced equipment, excellent talents and continuously strengthened technology forces. 8 Years Factory Poly-crystalline Solar Panel 200W Manufacturer in Sierra Leone, We are sincerely looking forward to establishing good cooperative relationships with customers from at home and abroad for creating a bright future together.


Poly-crystalline Solar Panel 200W

Technical parameter

Maximum Power(W)                           200W

Optimum Power Voltage(Vmp)           26.78V

Optimum Operating Current(Imp)       7.47A

Open Circuit Voltage(Voc)                  32.66V

Short Circuit Current(Isc)                     8.21A

Mechanical Characteristics

Cell Type Polycrystalline                     156x156mm (6 inch)

No of Cell                                              54 (6x9pcs)

Dimensions                                           1482x990x40mm

Weight                                                  17.6Kg

Front Glass                                           3.2mm,High Transmission, Low Iron,Tempered Glass

Junction box                                          IP65 Rated

Output Cable                                        TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                -40°C ~ + 85°C

Maximum System Voltage:                  600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.47%

Temperature Coefficients of Voc:        -0.389%

Temperature Coefficients of Isc:           0.057%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

 

Materials of solar panel

1).Solar Cell——Polycrystalline solar cell 156*156mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Poly-crystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • รายละเอียดเพิ่มเติม : http://www.rakaonlineyt.xyz/p/##folder## ขาย Panel  250W Poly Crystalline Modulle SP -250W รีวิว ราคา โปรโมชั่นพิเศษ ราคาพิเศษ ขายดี ซื้อที่ไหน หาโปรโมชั่น ดีไหม ราคาพิเศษ ราคาโปรโมชั่น ราคาล่าสุด ราคาพิเศษ แนะนำ สั่งซื้อออนไลน์ คุณภาพดี ซื้อที่ไหนดี Panel  250W Poly Panel  250W Poly Crystalline Panel  250W Poly Crystalline Modulle Urawaคุณกำลังอ่านข้อมูลเกี่ยวกับ Panel  250W Poly Crystalline Modulle SP -250W อยู่ใช่มั้ย หากคุณลังเล เราแนะนำว่า Panel  250W Poly Crystalline Modulle SP -250W เป็นสินค้าที่มีคุณภาพ และราคาเหมาะสมกับเงินที่คุณต้องเสียไป คุณสามารถอ่านข้อมูลเพิ่มเติม และอ่านรีวิว จากผู้ใช้งาน จริงได้ Gamba รายละเอียดเพิ่มเติมของ : Panel250W Poly Crystalline Modulle SP -250W Maxuimum Power/Pmax : 250W Maxuimum Power Tolerance : +-3% Open-Circuit Voltage/Voc : 36.7V Short-Circuit Current/lsc : 9.39A Max Power Voltage/Vmp : 30.6V Max Power Current/lmp : 8.17 Power Spectications STC 1000W/m2 AM 1.5 CELL250C Weigh :19.5kg Dimension 1640*990*40mm Max System Voltage 1000V Max Over Current Protecting Rating



    Build your own exterior windshield sun screen to help keep the sun’s heat out, but still provide some visibility from inside the boat’s cabin. These exterior mesh vinyl fabric shades have the added benefit of giving you privacy* while your boat is moored. Even though you can see through the mesh fabric from inside the boat’s cabin, people on the outside cannot see through the mesh fabric. Block the HEAT, not your VIEW!

    In this video we will show you how to pattern for the shades, sew a facing & binding on the edges and then how to install snaps and adhesive snap components called YKK Snads to the boat (a no drill solution for a snap stud).

    Order vinyl mesh fabric and supplies from: http://www.sailrite.com

    * NOTE – The visibility through the screen is always determined on the side of the screen which has the least amount of light. For example; At night if the lights are on full power inside a boat’s cabin the people on the outside will see silhouettes of persons inside the boat’s cabin.

    HOW TO MAKE A BOAT WINDSHIELD SUN SHADE CHAPTERS:
    Calculating Fabric & Patterning Material Required – 1:12 min
    Making the Pattern – 3:55 min
    Patterning Marine Vinyl Mesh – 18:54 min
    Creating Facings – 21:37 min
    Basting & Sewing Facing – 25:09 min
    Joining Shade Halves – 28:47 min
    Sewing Binding on Sides – 32:22 min
    Creating Velcro Flaps – 35:37 min
    Making Side Panels – 40:20 min
    Installing SNADs – 48:50 min
    Installing Gypsy Studs – 49:46 min
    Positioning & Installing Snaps – 58:40 min
    Overview 1:17:13 min
    Materials List – 1:20:31 min

    MATERIALS LIST:
    Filament Strapping Tape 3/4″ – Item # 5643
    Seamstick 3/8″ Basting Tape for Canvas – Item # 129
    Dura Skrim Patterning Material – Item # 103134
    Marine Vinyl Mesh Fabric from Sailrite we used Phifertex Plus Black – Item # 124511
    Seamstick 3/8″ Basting Tape for Sailmaking & Vinyl – Item # 659
    Polyester V-92 Thread or Profilen PTFE Lifetime Thread we used Profilen Black – Item # 107130
    Sunbrella Acrylic Binding from Sailrite we used Black 1″ – Item # 12400
    Polyester Loop 1″ – Item # 105036 (black), #478100 (white)
    Polyester Hook 1″ – Item # 105035 (black), #473100 (white)
    YKK® SNAD® 25mm Adhesive Backed Flexible Base Stud – Item # 103649 (black), #104451 (clear), #103652 (white)
    YKK® SNAD® 40mm Adhesive Backed Domed Stud – Item # 103587 (black), #103354 (white)
    SnapRite® Gypsy Stud 3/16″ Barrel – Item # 104236
    DOT Snap Fastener Normal Action Socket – Item # 333050
    SnapRite® Snap Fastener Button Silver 11/64″ Barrel – Item # 104151

    TOOLS LIST:
    Tape Measure 120 Inch – Item # 102986
    Multi Use Pins 1 1/2″ – Item # 102985
    Scribe-All Water Soluble Marking Pencil White – Item # 120681 or Fabric Marking Pencil Yellow – Item # 111002
    Gingher Scissors Right Handed – Item # 19104
    Sailrite Canvas Patterning Ruler – Item # 107040
    Sailrite Ultrafeed LS-1 PLUS Walking Foot Sewing Machine – Item # 300502 or Sailrite Ultrafeed® LSZ-1 PLUS Walking Foot Sewing Machine – Item # 300602
    Deluxe 5 1/2″ Magnetic Sewing Guide – Item # 103597
    1″ Swing Away Straight Binder – Item # 100103
    Sailrite Edge Hotknife Package (110 Volt) – Item # 103800
    3M® Tape Primer 94 – Adhesive Promoter – Item # 104166 – 8oz or Item # 120671 – Ampule
    3M® Silane Glass Treatment AP115 4oz – Item # 120678
    Quick Fit Kit in Waterproof Box – Snap Positioning System – Item # 102565
    Sailrite SnapRite System (4 Dies & 100 Mandrels) – Item # 104237
    Tape Measure, Marker, Pop Rivet Tool, Office Clamps

    Order vinyl mesh fabric and supplies from: http://www.sailrite.com

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Truck

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    WhatsApp Online Chat !