8 Years Factory Mono-Crystalline 200W Solar Panel in luzern
Short Description:
With a positive and progressive attitude to customer's interest, our company continuously improves our product quality to meet the needs of customers and further focuses on safety, reliability, environmental requirements, and innovation of
8 Years Factory Mono-Crystalline 200W Solar Panel in luzern, Our aim is "blazing new ground, Passing Value", in the future, we sincerely invite you to grow up with us and make a bright future together!
Mono-Crystalline 200W Solar Panel
Technical parameter
Maximum Power(W) 200W
Optimum Power Voltage(Vmp) 37.29V
Optimum Operating Current(Imp) 5.36A
Open Circuit Voltage(Voc) 45.48V
Short Circuit Current(Isc) 5.89A
Mechanical Characteristics
Cell Type Monocrystalline 125x125mm (5 inch)
No of Cell 72 (6x12pcs)
Dimensions 1580x808x35mm
Weight 14.5Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Cleaning solar panels with vacuum blasting
http://www.sys-teco.com/photovoltaic-cleaning.html
Photovoltaic plants are exposed 24 hours to atmospheric conditions. Not only does rain, wind, snow or sun affect the modules. Pollutes caused by air pollution, dust development, road traffic, bird droppings, falling leaves or fir needles can affect the solar modules surface in the long run quite a lot. Many of the dirt is removed by rain and snow.
However, this is definitely not the case for crusted soils such as heavily corrosive bird droppings or lime deposits. The vacuum blast method from systeco can help. To prevent the glass surface from being damaged, nutshell (grinded walnut shell) is used as the abrasive, which is used repeatedly in the circuit.
##################################################################################################
vacuum blast method, systeco, Tornado ACS, graffiti removal, innovative cleaning technology
To get to know us even better, there is more information about systeco and my person.
I look forward to hearing from you.
author: https://goo.gl/kUXAH5
subsribe channel: https://goo.gl/XxRlqv
Youtube: https://goo.gl/euTVId
Google+: https://goo.gl/GFpr41
Xing: https://goo.gl/kUXAH5
http://www.sys-teco.de
http://www.sys-teco.com
Cleaning solar panels with vacuum blasting