7 Years Factory Poly-crystalline Solar Panel 300W Swedish Factories
Short Description:
In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of 7 Years Factory Poly-crystalline Solar Panel 300W Swedish Factories, We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!
Poly-crystalline Solar Panel 300W
Technical parameter
Maximum Power(W) 300W
Optimum Power Voltage(Vmp) 37.15V
Optimum Operating Current(Imp) 8.08A
Open Circuit Voltage(Voc) 45.30V
Short Circuit Current(Isc) 8.87A
Mechanical Characteristics
Cell Type Poly-crystalline 156x156mm (6 inch)
No of Cell 72 (6x12pcs)
Dimensions 1956x992x50mm
Weight 22.5Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
In this video, I go over a little prep work required for my solar panel. I plan to make it approx 12V @ 3.5A. I’ll also build an identical one, but I’m not sure if ill have enough solar cells left over for the second panel yet.
Hopefully I have overcome the hardest part in building the panel, which is finding the box, or casing in which the cells sit in.
The item I am cutting is Plastic indoor/outdoor shelving which is white, hard, and heat resistant. It will not bend and it will provide ample protection for the cells as I plan on making this panel portable. The soldering iron I am using is a 100W/140W Weller model 8200 with a cutting tip.
This is the first of a series of installments on my DIY solar panel project. These panels will not be used for putting on top of a house, but to power small electronics and other small devices… the applications of which will be demonstrated in future videos.
The cells I am using are from MLSOLAR, and are .55V @ 3.65A a piece.
Filmed with a Cannon T3 under CFL low-med light.
For More videos subscribe my channel
https://www.youtube.com/channel/UCuhA6PQax62fXL5WuYmt-fw
Difference Between Inverter Vs hybrid Inverter Link
Best Battery For Solar System link
solar charge controller installation Hindi/Urdu
Solar Controller part 2
300 watt solar panel price in Pakistan hindi/urdu