7 Years Factory Poly-crystalline Solar Panel 200W Wholesale to Amsterdam
Short Description:
We are experienced manufacturer. Wining the majority of the crucial certifications of its market for 7 Years Factory Poly-crystalline Solar Panel 200W Wholesale to Amsterdam, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.
Poly-crystalline Solar Panel 200W
Technical parameter
Maximum Power(W) 200W
Optimum Power Voltage(Vmp) 26.78V
Optimum Operating Current(Imp) 7.47A
Open Circuit Voltage(Voc) 32.66V
Short Circuit Current(Isc) 8.21A
Mechanical Characteristics
Cell Type Polycrystalline 156x156mm (6 inch)
No of Cell 54 (6x9pcs)
Dimensions 1482x990x40mm
Weight 17.6Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Polycrystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
A solar panel comprises a cluster of solar cells that generate electricity through sunlight. Thin film and crystalline silicon which includes monocrystalline & polycrystalline, are the two common types of solar cells. Thin film cells are comparatively cheaper than silicon cells. The growth of solar energy panel market is considerably rising in the Asia-Pacific countries due to favorable government regulations and increasing customer inclination towards the applications of sustainable energy. The rising cost of fossil fuels and increasing consumer awareness towards solar energy have resulted in a high production of solar panels. Low conversion efficiency is a major concern for this market, as the rate of energy conversion is low which eventually affects the power generation capacity of solar power plants.
To Get Full report Here @ http://www.researchbeam.com/asia-pacific-solar-energy-panel-china-japan-india-korea-market
JinkoSolar holdings, based in Japan, launched a new solar module series “eagle+” in May 2014 to increase the performance of solar products. The eagle+ series module features innovative cell and assembly technology which allows them to remain PID free under 85 degrees Celsius and in 85% of relative humidity, which is 10 times higher than International Electro technical Commission standards. Eagle+ series module minimizes the possibility of snail trailing and yellowing which results from long term use and provides new standards to render an optimum performance in this solar market. This market is segmented on the basis of Type, End User, Mounting Systems and Country.
The key players operating in this market are Canadian Solar First Solar, Jinko Solar, Sharp, Suntech Power Holdings, Trina Solar, Yingli Green Energy Holding Bosch Solar Energy, Hanwha SolarOne, JA Solar Holdings, LDK Solar, Panasonic and SolarWorld.
KEY TAKE AWAYS
• The report provides an in depth analysis of the Asia-Pacific solar energy panel market with current and future trends
• This report highlights the key drivers, opportunities and restraints of the market along with an impact analysis of the forecast period
• Current and future trends are outlined to determine the overall attractiveness and single out profitable trends to gain a stronger foothold in the market
• Market estimation for type, end user and geography segment is derived from the current market scenario and expected market trends
• The Porter’s five forces analysis highlights the potency of buyers and the suppliers participating in this market. This would further lend a competitive edge to the stakeholders and help in better decision making
Enquire @ http://www.researchbeam.com/asia-pacific-solar-energy-panel-china-japan-india-korea-market/enquire-about-report
MARKET SEGMENTATION
The market is segmented on the basis of Type, Mounting System, End User and Country.
MARKET BY TYPE
• Monocrystalline panel
• Polycrystalline panel
• Hybrid panel
• Black backed panel
• Thin film
MARKET BY MOUNTING SYSTEM
• Ground mounted
• Roof mounted
• Solar tracker
• Fixed racks
MARKET BY END USER
• Commercial
• Government
• Residential
• Utility-Scale
MARKET BY COUNTRY
• China
• Japan
• Australia
• India
• Others
KEY PLAYERS
• Canadian Solar Inc.
• Jinko Solar Holding Co. Ltd.
• First Solar
• Suntech Power Holdings
• Trina Solar
• Yingli Green Energy Holding
• JA Solar Holdings
• Hanergy Holding Group
• LDK Solar Co. Ltd.
• SolarWorld
Movable Solar Stands Must Watch
