7 Years Factory Poly-crystalline Solar Panel 200W for Latvia Factories
Short Description:
Our commission is to serve our users and clients with best quality and competitive portable digital products for 7 Years Factory Poly-crystalline Solar Panel 200W for Latvia Factories, We sincerely welcome both foreign and domestic business partners, and hope to work with you in the near future!
Poly-crystalline Solar Panel 200W
Technical parameter
Maximum Power(W) 200W
Optimum Power Voltage(Vmp) 26.78V
Optimum Operating Current(Imp) 7.47A
Open Circuit Voltage(Voc) 32.66V
Short Circuit Current(Isc) 8.21A
Mechanical Characteristics
Cell Type Polycrystalline 156x156mm (6 inch)
No of Cell 54 (6x9pcs)
Dimensions 1482x990x40mm
Weight 17.6Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Polycrystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
MENTIONED IN THIS VIDEO:: http://amzn.to/2tNsBvW
This is our review of the HQST 100 Watt 12 Volt Polycrystalline Solar Panel. Key component in establishing an off-grid solar energy system. Weighing in at only 16.5lbs, this panel contains 36 efficient polycrystalline solar cells protected by a thin layer of tempered glass. The panel is designed to withstand heavy snow and wind loads. The back of the panel features a waterproof junction box and MC4 leads for easy plug and play use! Use this panel alone or add additional panels to create a custom solar energy system.
LG Electronics is a consumer electronics manufacturer and has committed to expanding its operations in the PV-industry. Their Solar Module LG NeON 2 BiFacial is a high-efficiency bifacial module that can provide a significant increase in energy yields. The NeON cell technology and the 12-wire CELLO interconnection were transferred into this new module. LG conducted and documented outdoor tests under several common conditions in which the yield increase was about 10 percent. With the junction box concept, the usual single junction box is split into three smaller boxes that are located outside the cell area to avoid shading and heating on the backside. The relatively low weight makes the installation more convenient. Bifacial technology is an important trend, and the jury was convinced by the cleverness of an installation that needs less material and less space while producing the same total system power.