6 Years manufacturer Poly-crystalline Solar Panel 3W to Russia Manufacturer
Short Description:
The key to our success is "Good Product Quality, Reasonable Price and Efficient Service" for 6 Years manufacturer Poly-crystalline Solar Panel 3W to Russia Manufacturer, If you are interested in any of our products or would like to discuss a customized order, please feel free to contact us.
Poly-crystalline Solar Panel 3W
Technical parameter
Maximum Power(W) 3W
Optimum Power Voltage(Vmp) 9V
Optimum Operating Current(Imp) 0.34A
Open Circuit Voltage(Voc) 10.8V
Short Circuit Current(Isc) 0.37A
Mechanical Characteristics
Cell Type Polycrystalline
No of Cell 18 (2x9pcs)
Dimensions 145x245x18mm
Weight 0.52KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 10A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Polycrystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
OMV Blog: http://www.omv.com/blog/?p=986/
OMV Website: http://www.omv.com/wind2hydrogen
The new energy era is dawning, bringing with it wind and solar power. Renewable, sustainable energy with just one problem: how to store it. How can we store enough of this power to secure supply to entire cities? The solution could be hydrogen.
Today, wind turbines generate electrical power which can be stored directly in the grid. When strong winds generate too much power, or if demand is low, it can be difficult to store. And when the wind drops off, there isn’t enough energy to maintain supply. One solution would be to use the surplus energy to produce hydrogen directly on site via electrolysis. After all, hydrogen can be stored! And it could power the grid at any time as part of the natural gas network or used directly via fuel cells. In future we will also be able to use hydrogen on the road.
A Wind2Hydrogen plant which can do this has been built in Austria at OMV’s site in Auersthal near Vienna. Here production technology will be tested and the experts will see how suitable the natural gas network is for storing hydrogen. OMV has experienced partners on board for this project, with researchers from Fronius International, EVN, HycentA and the Energy Institute of the Johann Kepler University all working on this new technology. It’s sponsored by the Climate and Energy Fund.
— Note: As of June 13, 2017 Petrol Ofisi A.S. is no longer part of OMV Group.
————————————————–
Subscribe to the OMV Channel: http://www.youtube.com/OMV
Follow our Blog: http://www.omv.com/blog
Follow us on Twitter: http://www.twitter.com/omv
Follow us on LinkedIn: http://www.linkedin.com/company/omv
Follow us on XING: http://www.xing.com/company/omv
Follow us on Facebook: http://www.omv.com/portal/01/com/facebook
http://www.uec-electronics.com/mobile-power-products/power-generation/
- Solar Power Collection
- Hybrid Power Generation
- High Density Energy Storage
- Rapid ROI – Fuel, Maintenance, and Rapid Logistics
- Reliable and Combat Proven
UEC Electronic’s Ground Renewable Expeditionary Energy Network System (GREENS) saves fuel, money, and reduces the frequency of resupply missions. GREENS is the first viable solution to replace traditional fuel-fired generators. GREENS was developed as a USMC Program of Record but has applicability to both civilian and military customers. The system collects solar energy and converts it into useable power. Excess solar energy is stored in the array of high energy density battery systems (HEDBS) for use when solar energy is insufficient. The system is light-weight and man portable. The GREENS HEDBS is safe, and has been approved as UN/DOT Class 9 tested for commercial shipment.
———————————————————————————————————–
One GREENS will provide up to 1kW of power, and up to five systems can be paralleled together to provide 5 kW of power. No formal operator training is required. System deployment time is quick less than 15 Minutes by an untrained user. The system can be used as a completely renewable solution, or can be used in a hybrid configuration with a generator. If used as a hybrid solution, the GREENS controller will auto-start the generator if necessary to recharge the batteries, and will run the generator at peak efficiency.
