5 Years Factory Poly-crystalline Solar Panel 5W to Chile Manufacturers
Short Description:
With our rich experience and considerate services, we have been recognized as a reliable supplier for many international buyers for 5 Years Factory Poly-crystalline Solar Panel 5W to Chile Manufacturers, To learn more about what we can do for you, contact us at any time. We look forward to establishing good and long-term business relationships with you.
Poly-crystalline Solar Panel 5W
Technical parameter
Maximum Power(W) 5W
Optimum Power Voltage(Vmp) 9V
Optimum Operating Current(Imp) 0.56A
Open Circuit Voltage(Voc) 10.8V
Short Circuit Current(Isc) 0.62A
Mechanical Characteristics
Cell Type Polycrystalline
No of Cell 18 (3x6pcs)
Dimensions 175x270x18mm
Weight 0.65KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 10A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Polycrystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
For more Information Visit
http://agradesolarsolutionsaustralia.com.au/
Mobile: 0419 889 555
Address: P.O Box 41 Rosanna Vic 3084
Fax: (03) 9455 0532
Email: [email protected]
ABN: 24605924396
Craig: Hi, I’m with Darren from DJ’s Family Butchery. As he discussed when I came to quote his system, he wanted a 5 kilowatt to cover majority of his electrical usage. When we got on the roof, there’s an app on my phone which is a sun seeker app which tracks the path of the sun throughout the year and realized the building next-door was going to cause a considerable amount of shading for a good portion of the year. So, I talked him out of the bigger, 5 kilowatt system into a smaller 3 kilowatt system which he would get 100% efficiency out of. That way, he’s saving more money, not only the production and his usage but he’s not having any downtime with the system being shaded.
If he had to put in a 5 kilowatt system, his production would have been greatly reduced because once one panel in a string of panels is hit by a shade, it brings down the efficiency of the whole string. So therefore, 3 kilowatt system, full sun, full potential, full usage.
Topics: solar energy, solar panel, solar panel install, solar panel installation australia, solar panels, off-grid, on-grid, solar solutions, wind power, solar power systems, renewable energy, green energy
YR Single-&Three-roller Pre-heater /preheating cylinder Yong Xiao
[email protected]
www.red-hope.net
