30 Years Factory Mono-Crystalline 60W Solar Panel Factory for Burundi
Short Description:
We support our buyers with ideal high quality products and high level service. Becoming the specialist manufacturer in this sector, we have gained rich practical experience in producing and managing for 30 Years Factory Mono-Crystalline 60W Solar Panel Factory for Burundi, Your inquiry will be highly welcomed and a win-win prosperous development are what we are expecting.
Mono-Crystalline 60W Solar Panel
Technical parameter
Maximum Power(W) 60W
Optimum Power Voltage(Vmp) 18.46V
Optimum Operating Current(Imp) 3.25A
Open Circuit Voltage(Voc) 22.51V
Short Circuit Current(Isc) 3.57A
Mechanical Characteristics
Cell Type Mono-crystalline 125 x 83mm
No of Cell 36 (4x9pcs)
Dimensions 821x554x35mm
Weight 5.0Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*83mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
More stuff that happened today. T’was much better than the last few days. I am grateful for everyone who comments and shares their views. I Truly love you all from the bottom of my heart.
P.S. I forgot the Ensure. Will get it next time I leave my place.
Deb’s Channel: Refusestogiveup
Help support Julian’s LED videos on Patreon: https://www.patreon.com/julian256
A cheap and simple way to connect a 10W LED to a 12 volt supply. A current regulated LED driver keeps the LED at maximum brightness, while a heatsink and fan keeps it at a safe temperature. Total cost of parts, including the car cigar lighter plug and cable, is around £4.
2 Pin 50mm DC 12V VGA Card Cooler Heatsinks Cool Fan SY http://r.ebay.com/jVvnaY
5 X High Power 10W Warm White DC 9-11V LED Beads Lamp Bulb Chips 900-1000LM SMD http://r.ebay.com/BHbfHJ
1pcs Power Driver for 1x10w LED Light Lamp 950mA 12V MR16 http://www.ebay.com/itm/1pcs-Power-Driver-for-1x10w-LED-Light-Lamp-950mA-12V-MR16-/121080902070?roken=cUgayN&soutkn=TotL42
12V 24V Male Car Cigarette Lighter Socket Plug Connector On Off Switch 1.5m DBX http://r.ebay.com/SLv2Op
