27 Years Factory Mono-Crystalline 200W Solar Panel for Pakistan Manufacturer
Short Description:
Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for 27 Years Factory Mono-Crystalline 200W Solar Panel for Pakistan Manufacturer, All the opinions and suggestions will be greatly appreciated! The good cooperation could improve both of us into better development!
Mono-Crystalline 200W Solar Panel
Technical parameter
Maximum Power(W) 200W
Optimum Power Voltage(Vmp) 37.29V
Optimum Operating Current(Imp) 5.36A
Open Circuit Voltage(Voc) 45.48V
Short Circuit Current(Isc) 5.89A
Mechanical Characteristics
Cell Type Monocrystalline 125x125mm (5 inch)
No of Cell 72 (6x12pcs)
Dimensions 1580x808x35mm
Weight 14.5Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Organic solar cells make use of low-cost organic polymers for photovoltaics. Although these solar cells may appear to be quite different from solar cells made with conventional inorganic semiconductors (e.g. they make use of exciton generation rather than electron-hole generation), this tutorial shows that the essential device physics is readily understood in terms of familiar solar cell fundamentals. The use of phase-segregated “bulk heterojunction” structures to enhance the short-circuit current is described as well.
on nanoHUB: http://nanohub.org/resources/11950
Este proyecto tiene como objetivo primordial, mostrar el funcionamiento básico de un inversor y como conectarlo para que funcione como UPS. este tutorial se encuentra en http://construyasuvideorockola.com/proyecto_inversor_01.php
Lean el artículo escrito y al final encontrarán un PDF que podrán descargar gratis para realizar este proyecto.