26 Years Factory Mono-Crystalline 50W Solar Panel to Lithuania
Short Description:
Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs for 26 Years Factory Mono-Crystalline 50W Solar Panel to Lithuania, Our company warmly welcome friends from all over the world to visit, investigate and negotiate business.
Technical parameter
Maximum Power(W) 50W
Optimum Power Voltage(Vmp) 18.72V
Optimum Operating Current(Imp) 2.67A
Open Circuit Voltage(Voc) 22.83V
Short Circuit Current(Isc) 2.94A
Mechanical Characteristics
Cell Type Monocrystalline 125×62.5mm
No of Cell 36 (4x9pcs)
Dimensions 636x554x25mm
Weight 4.2Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
TTP Energy Co.,Ltd บริการล้างแผงโซล่าเซลล์ด้วยเครื่องมือที่ทันสมัยจากประเทศ เยอรมนี สะอาด รวดเร็ว ประหยัดน้ำ เพิ่มประสิทธิ์ภาพให้กำลังการผลิตไฟฟ้าของระบบโซล่าเซลล์ของท่าน สนใจติดต่อ 088-0222727 บริษัท ที ที พี เอ็นเนอร์จี จำกัด ในเครือ TTP Group
http://www.youtube.com/watch?v=nm5wQ-kPJnw&feature=share&list=PL-EP0UttkLQytYEDeTNzeBDsjOu_M4VDZ
…incercati si voi si spuneti-mi parerile voastre..
cateva rectificari: sarma poate fi de : 0,10 – 0,20 mm,la primar,si se bobineaza prima pe tot inelul de
de ferita,si de el se fac legaturile la bec, (eu am bobinat 400 spire bifilare)…
…. 0,50 – 0,70 mm, la secundar,( eu am bobinat 25 spire bifilare),si se bobineaza peste primar,si se fac legaturile la circuit.Bobinajul,atat la primar cat si la secundar,eu l-am facut bifilar,am mers cu 2 sarme deodata,iar legaturile,atat la primar cat si la secundar , le-am facut ca la o bobina tesla,adica capatul primului fir se leaga impreuna cu sfarsitul de la al 2-lea fir,si se folosesc pentru legaturi celelalte 2 capete care raman…..
aveti schema in adresa urmatoare: https://www.youtube.com/watch?v=dmB1BqvW8hE