26 Years Factory Mono-Crystalline 30W Solar Panel to Namibia Factory
Short Description:
Our company aims to operating faithfully, serving to all of our customers , and working in new technology and new machine constantly for 26 Years Factory Mono-Crystalline 30W Solar Panel to Namibia Factory, If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
Mono-Crystalline 30W Solar Panel
Technical parameter
Maximum Power(W) 30W
Optimum Power Voltage(Vmp) 17.66V
Optimum Operating Current(Imp) 1.71A
Open Circuit Voltage(Voc) 21.39V
Short Circuit Current(Isc) 1.88A
Mechanical Characteristics
Cell Type Mono-crystalline 125×41.6mm
No of Cell 36 (4x9pcs)
Dimensions 449x554x25mm
Weight 2.8Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*41.6mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
อัพแผงโซล่าเซลล์จาก20W เป็น100W
แหล่งซื้ออุปกรณ์โซล่าเซลล์
Feacbook : Solartech-Center Ltd. จำหน่ายชุดแผงโซล่าเซลล์ ราคาถูกครบวงจร
This is a rather cute little 12W LED street light I got from a Chinese supplier called Banggood. It’s designed to run on a 220V supply (180 to 255V) and is designed to mount onto a pipe about 42mm diameter. (1.5″?).
This unit was very typical of Chinese LED lights in that it had a stripped and tinned earth wire in the short pre-installed flex, but the earth wire was not connected internally and was actually cut flush with the flex inside.
The unit has a rather neat printed glass front with four screw clamps that pull it tightly onto a silicone grommet. The LED panel inside is an aluminium core PCB held onto the inside of the case with six screws with heatsink compound between it and the finned aluminium case. The LEDs themselves also have wet heatsink compound behind them which suggests that they have just been pressed into place and soldered without the use of thermal transfer glue. The power supply is a generic current regulated unit designed for driving between 8 and 12 series wired LEDs. It’s mounted in a small aluminium extrusion with end-caps and filled with black potting compound.
The lights are available in cold or warm white, but if you were so inclined you could replace the standard 1W LED “beads” with any colour you wanted.
Apart from the lack of a ground connection this is a very neat and well built light. As an actual street light it could be quite effective for lighting a pathway or side of a house if mounted on suitable angled pipes at a height of about 3-5 metres.
I’d recommend connecting the ground lead internally with a small crimp onto one of the screws holding the PCB to the heatsink.