26 Years Factory Mono-Crystalline 180W Solar Panel Factory in Adelaide
Short Description:
We have our own sales team, design team, technical team, QC team and package team. We have strict quality control procedures for each process. Also, all of our workers are experienced in printing field for 26 Years Factory Mono-Crystalline 180W Solar Panel Factory in Adelaide, We are looking forward to establishing long-term business relationships with you. Your comments and suggestions are highly appreciated.
Mono-Crystalline 180W Solar Panel
Technical parameter
Maximum Power(W) 180W
Optimum Power Voltage(Vmp) 36.42V
Optimum Operating Current(Imp) 4.96A
Open Circuit Voltage(Voc) 44.45V
Short Circuit Current(Isc) 5.44A
Mechanical Characteristics
Cell Type Mono-crystalline 125x125mm (5 inch)
No of Cell 72 (6x12pcs)
Dimensions 1580x808x35mm
Weight 14.5Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
johnsolar had an idea. he suggested making a “battery charger” from “solar garden lights”. last year i did an “experiment” with these solar garden lights and realized the potential to “charge batteries” for “free. i decided to go the next step and disassemble the garden lights and see if i could use the “solar panel” and battery holder only. this was a success and i will buy more of these and do a better job of building the box and soldering all the joints. “offgrid” “grid down” “shtf” “teotwawki” “wrol”
http://www.solavore.com/#_a_bctruck
http://www.youtube.com/watch?v=8acs7_vNUm4
This video shows the automated soldering stringer making strings of polycrystalline solar cells (laser-cut pieces of polycrystalline solar cells) for 20W Photonic Universe polycrystalline solar panels.
Use of the automated stringer helps Photonic Universe eliminate potential soldering risks such as dry joints and other similar problems which often accompany manual soldering processes.
