25 Years Factory Mono-Crystalline 10W Solar Panel Factory for Jeddah
Short Description:
"Sincerity, Innovation, Rigorousness, and Efficiency" is the persistent conception of our company for the long-term to develop together with customers for mutual reciprocity and mutual benefit for 25 Years Factory Mono-Crystalline 10W Solar Panel Factory for Jeddah, Our professional technical team will be wholeheartedly at your service. We sincerely welcome you to visit our website and company and send us your inquiry.
Mono-Crystalline 10W Solar Panel
Technical parameter
Maximum Power(W) 10W
Optimum Power Voltage(Vmp) 17.56V
Optimum Operating Current(Imp) 0.58A
Open Circuit Voltage(Voc) 21.35V
Short Circuit Current(Isc) 0.64A
Mechanical Characteristics
Cell Type Mono-crystalline 52x35mm
No of Cell 36 (4x9pcs)
Dimensions 250x370x17mm
Weight 1.2Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 52*35mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
I haven’t been driving my truck a lot the last long and cold winter and I guess that’s why my batterie died. Now the battery was not even four years old and I didn’t really want to replace it already but I had to. So I decided to do something to increase the lifespan of the new battery.
I mouted 3 12V epoxy resin solar cells on the truck bed cover. I used silicone to glew them on securely. The cells are only a few millimeters thick so I can still open the bak flip cover without damaging the cells. I installed a charging regulator right next to the new battery which keeps the current from flowing backwards and avoids an overcharging of the battery.
The new battery that I got is a 100Amp hours car battery from Battery Industry Germany (BIG). It was the biggest battery that I could find that would fit into the spot.
The maximum output of the cells is 0.4A. So whenever the batterie is not fully charged or for example the radio is used with the engine off the solar cells will fill the battery right back up and provide a good maintenance charge.
this is where i bought the cells: http://www.ebay.de/itm/3x-12V-100mA-1-2W-150x70mm-Solarmodul-Solarzelle-Monokristallin-vergossen-/370704767825?pt=Bauteile&hash=item564fb9db51
this is where i bought the batter: http://www.batterie-industrie-germany.de/
