22 Years Factory Mono-Crystalline 250W Solar Panel Factory from Ethiopia

Short Description:


Product Detail

Product Tags

We are proud of the high customer satisfaction and wide acceptance due to our persistent pursuit of high quality both on product and service for 22 Years Factory Mono-Crystalline 250W Solar Panel Factory from Ethiopia, We warmly welcome all interested customers to contact us for more information.


Mono-Crystalline 250W Solar Panel

Technical parameter

Maximum Power(W)                        250W

Optimum Power Voltage(Vmp)        30.3V

Optimum Operating Current(Imp)    8.29A

Open Circuit Voltage(Voc)               36.76V

Short Circuit Current(Isc)                 8.91A

Mechanical Characteristics

Cell Type Monocrystalline                 156x156mm (6 inch)

No of Cell                                         60 (6x10pcs)

Dimensions                                     1640x990x40mm

Weight                                             18.0KGS

Front Glass                                     3.2mm,High Transmission, Low Iron,Tempered Glass

Junction box                                    IP65 Rated

Output Cable                                   TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                -40°C ~ + 85°C

Maximum System Voltage:                  600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.47%

Temperature Coefficients of Voc:        -0.389%

Temperature Coefficients of Isc:           0.057%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Mono-crystalline solar cell 156*156mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Polycrystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • The Sierra Solar LED Light Kit for Indoor / Outdoor use, complete with Solar Panel, and built in Charge Controller & Battery. All cables and connection hardware is included.



    I am experimenting with a solar powered freezer outside my tiny house on wheels. I have a deer that I took in for processing which is now in the freezer.

    It was a full sunny day so I put the freezer that I bought last year out in the new shed that I am building. I put it up on blocks and put a pallet under it to keep it off the ground.

    I ran an extension cord from the tiny house to the freezer and it powered up and ran, fully on the power of the sun.

    Next I worked a bit on the shed walls. I am trying to finish the sheathing on the outside of my solar batter shed in between hunting and other things.

    It is taking me a long time though because I have to dig out each piece of wood from the barn wood pile. Each piece of wood takes about an hour to dig out and prepare by removing all the nails.

    But it is free wood and I do not have the money to buy new wood so I am using what I have on hand.

    The first wall I finished is right by the freezer so that I can keep the afternoon sun off it and allow it to run efficiently.

    I got a deer in the morning but you have seen that video already. I am processing this deer fully myself. This one will be made into jerky. Some will be put away for long term storage and some will be used as fresh jerky. Some will be frozen. Some will be made into pemmican for long term storage as well.

    I managed to get a bit of work done on the shed while processing the deer and working on the freezer.

    Later, after the sun went down, I fired up the little HF generator just to make sure the freezer runs long enough to fully freeze the meat. I do not want to take a risk with this deer meat.

    Thanks for watching. Please Subscribe, like and share.

    Troy

    http://www.theoffgridproject.com

    http://www.thedoityourselfworld.com

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup

    WhatsApp Online Chat !