22 Years Factory Mono-Crystalline 10W Solar Panel Manufacturer in Bogota
Short Description:
The customer satisfaction is our primary target. We uphold a consistent level of professionalism, quality, credibility and service for
22 Years Factory Mono-Crystalline 10W Solar Panel Manufacturer in Bogota, We are glad that we are steadily growing with the active and long term support of our satisfied customers !
Mono-Crystalline 10W Solar Panel
Technical parameter
Maximum Power(W) 10W
Optimum Power Voltage(Vmp) 17.56V
Optimum Operating Current(Imp) 0.58A
Open Circuit Voltage(Voc) 21.35V
Short Circuit Current(Isc) 0.64A
Mechanical Characteristics
Cell Type Mono-crystalline 52x35mm
No of Cell 36 (4x9pcs)
Dimensions 250x370x17mm
Weight 1.2Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 52*35mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Developed 25 years ago, now banned by Department of Energy and Climate Change, has been my UK home with day time solar space heating for the past 12 years TAX FREE
http://www.greenpowerscience.com/SHOPSTIRLINGENGINES.html
This engine is a new solar stirling design I found, they work with a Fresnel Lens or a Parabolic Mirror. Strong and efficient for its size. A proper Fresnel Lens. Also a Dual Rotor Axial Flux Generator.
Most people try a plastic reflector from the back, this is a poor option. Also if you use a standard “Dynamo” for power, you will be lucky to get 3-10 watts. Stirling engines are hindered by “COGGING” Axial Flux limits cogging.
Still the overall cost and time to get a max of 40 watts. Solar Panels are by far the best option. But these are fun for sure.
We have been trying different videos and had a run of experiments not going right. Also Florida is very cloudy from June – July, this video took 4 hours to shoot waiting for the clouds.
