21 Years Factory Poly-crystalline Solar Panel 150W Anguilla Manufacturer
Short Description:
We are commitment to offer the competitive price ,outstanding products quality, as well as fast delivery for 21 Years Factory Poly-crystalline Solar Panel 150W Anguilla Manufacturer, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.
Poly-crystalline Solar Panel 150W
Technical parameter
Maximum Power(W) 150W
Optimum Power Voltage(Vmp) 17.92V
Optimum Operating Current(Imp) 7.83A
Open Circuit Voltage(Voc) 21.86V
Short Circuit Current(Isc) 8.59A
Mechanical Characteristics
Cell Type Poly-crystalline 156x156mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1482x678x35mm
Weight 11.9KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Dirt Cheap Batteries For Off Grid Solar Power Systems For Homes
DIY solar battery banks never have enough storage! Would dirt cheap batteries help? Keep reading to find out how you could expand your battery storage and still save thousands of dollars on your solar energy system.
Do It Yourselfers (DIY) interested in building a homemade solar energy system, from scratch or using a kit, are looking to store as much power as possible. If the sun doen’t shine or the grid goes down for three or four days, they may need a large depenable battery bank.
However, the “Achilles heel” of residential solar, wind, or other power generating devices is the battery bank. Until now, storage battery banks were extremely expensive to build and maintain. Batteries don’t last forever and when they die they need to be replaced.
Fortunately, DIYers now have access to a battery reconditioning program that shows people how to get batteries for free (or dirt cheap), then how to recondition those batteries with a safe simple new method (so they’re back to “like-new” condition).
This exciting new “DIY” battery reconditioning program works on nearly every kind of battery even batteries previously though to be impossible to recondition. Car batteries, computer and phone batteries, rechargable batteries, long life batteries, deep cycle marine batteries, golf cart batteries, forklift batteries, alternative energy batteries and many other kinds of common batteries.
Imagine how much money could be saved by getting free or dirt cheap batteries (that many industries are simply throwing away), and then reconditioning those batteries to like new condition. If you can see how this program could save you a ton of money building and maintaining a solar panel storage battery bank then click the link below to learn more.
http://hypr4life.com/batteries
lw.. https://www.youtube.com/watch?v=ee-lACuF-bQ
chw.. https://www.youtube.com/watch?v=ee-lACuF-bQ
SUNNYWORLD automatic solar cell Tabber and Stringer Machine
Email: [email protected]
Shenzhen XINHONGHUA Solar Energy Co.,Ltd was founded in 2003, we are specialized in manufacturing Poly-crystalline,monocrystalline solar panels from 5w-320w and foldable solar panel with strong R&D ability to develop new solar application products. With more than 10 years experience in photovoltaic industry, we have set up factories in Shenzhen and Huizhou. Our solar panels have been widely exported to more than 50 countries.
For our own development needs, we began the research and development of the first automatic solar cell welding machine which can support both full solar cells and cutting cells in 2011, and succeeded in the beginning of 2012. After constantly test in our own plant, it was launched to the market in 2013. Because of its stable quality and attractive price, till now we sold out nearly 100 sets to China, India, Turkey and some other countries.
To meet different customer’s demands, SUNNWORLD will be improved better and better in the future.