21 Years Factory Poly-crystalline Solar Panel 100W Bogota Manufacturer
Short Description:
Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs for 21 Years Factory Poly-crystalline Solar Panel 100W Bogota Manufacturer, We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development.We strongly believe that we can do better and better.
Technical parameter
Maximum Power(W) 100W
Optimum Power Voltage(Vmp) 17.87V
Optimum Operating Current(Imp) 5.60A
Open Circuit Voltage(Voc) 21.45V
Short Circuit Current(Isc) 6.17A
Mechanical Characteristics
Cell Type Polycrystalline 156x104mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1120x678x35mm
Weight 9.7KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Polycrystalline solar cell 156*52mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Conductive Wire Glue. What is it and is it worth buying?
Here is how to make an AM radio transmitter, much easier than the FM… so enjoy! 
Send me mail 
:
PO box 1172
Orem, UT
Support me on Patreon to fund better experiments : https://www.patreon.com/keystonescience
Join the discord discussion! : https://discord.gg/rvnbhNN
The pen I use was donated by: https://hobblecreekcraftsman.com
Intro Made by Tate Storey, check out his channel! : http://youtu.be/dCyHF8QJzHU
My multimeter was donated from https://goo.gl/uOGdwd
————————————-
List of Materials:
1- 1 MHz crystal oscillator
2- step up Transformer
3- 4AA battery case
4- PCB perf board
5- ( optional ) LM386 op amp
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Piezo Electric Crystal Video: https://youtu.be/EhnmXC-P_ow
Induction Video: https://youtu.be/FXRBkQ2tniY
FM transmitter: https://youtu.be/lnyvsy4v9f0
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Inquires: [email protected]
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
music:
Broke for free, Night owl ; pixel land, Kevin Macleod
Licensed under Creative Commons: By Attribution 3.0
http://creativecommons.org/licenses/by/3.0/
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Twitter: @Keyst0neScience
Facebook : https://www.facebook.com/KeystoneScience/ ( I never get on facebook though )
