21 Years Factory Mono-Crystalline 150W Solar Panel in Iraq

Short Description:


Product Detail

Product Tags

Our company sticks to the principle of "Quality is the life of the company, and reputation is the soul of it" for 21 Years Factory Mono-Crystalline 150W Solar Panel in Iraq, "Create Values,Serving Customer!" is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, Please contact with us now


Mono-Crystalline 150W Solar Panel

Technical parameter

Maximum Power(W)                            150W

Optimum Power Voltage(Vmp)            17.92V

Optimum Operating Current(Imp)        7.83A

Open Circuit Voltage(Voc)                   21.86V

Short Circuit Current(Isc)                     8.59A

Mechanical Characteristics

Cell Type Monocrystalline                 156x156mm (6 inch)

No of Cell                                            36 (4x9pcs)

Dimensions                                       1485x668x35mm

Weight                                                 11.6KGS

Front Glass                                        3.2mm,High Transmission, Low Iron,Tempered Glass

Junction box                                       IP65 Rated

Output Cable                                     TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                 -40°C ~ + 85°C

Maximum System Voltage:                    600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.435%

Temperature Coefficients of Voc:        -0.35%

Temperature Coefficients of Isc:           0.043%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Mono-crystalline solar cell 156*156mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Polycrystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • Full details: https://goo.gl/gX7eOU



    SolarCross
    The Sun powered electric bicycle can ride when the sun is shining and the ground is level. This electric mountain bike will continue to roll forward with no pedaling or battery power required, powered only by the sunshine. Successfully demonstrating the design. When I do pedal however… the e-bike becomes a solar power assisted e-bike.

    I tried to climb some small hills, works but still very slow…

    Bike weight with out solar kit: 40 lbs
    Bicycle solar kit: under 5 lbs
    Open voltage: 10 volts DC
    Current: 10 amps DC (under load the PV output drops)
    top speed: 7 km/h

    setting two goals :
    1. break 10 km/h
    2. reach +15km/h

    The white reflectors I’ve attached on the sides of the solar panels provide a noticeable difference in output from a wider degree of angle to the sun, they reflect diffuse light and are typically used for light fixtures. The material was donated by WhiteOptics.com.

    Some people in the past have commented that my mountain bike design is not ideal for reaching top speeds etc.. because of the added wind resistance from the panels… My reply is that speeds under 15-20 km/h wind resistance is minimal and rolling resistance is the greater factor.

    My solar panels are very lightweight and the prototype weighed just 100g. They survived over 600km strapped to the back of my bike as I spent 16 days trekking across British Columbia, Canada. Noticeable scratches and small abrasions are covering the Fluorinated ethylene propylene or FEP top sheets and just 3 cells have incurred damage. Though they still provide enough solar juice for this video to be made !

    thanks for watching..

    Project: Solar-Cross

    http://www.solar-cross.thekpv.com

    https://www.facebook.com/SolarCross.Ebike

    https://plus.google.com/+TerryHope


    Night of the Owl by Kevin MacLeod (incompetech.com)
    Licensed under Creative Commons: By Attribution 3.0

    http://creativecommons.org/licenses/by/3.0/

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the House

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    WhatsApp Online Chat !