2016 New Style Mono-Crystalline 30W Solar Panel to Ecuador Importers
Short Description:
Our advantages are lower prices,dynamic sales team,specialized QC,strong factories,high quality products and services for 2016 New Style Mono-Crystalline 30W Solar Panel to Ecuador Importers, We encourage you to make contact as we are looking for partners in our venture. We are sure you will find doing business with us not only fruitful but also profitable. We are ready to serve you with what you require.
Mono-Crystalline 30W Solar Panel
Technical parameter
Maximum Power(W) 30W
Optimum Power Voltage(Vmp) 17.66V
Optimum Operating Current(Imp) 1.71A
Open Circuit Voltage(Voc) 21.39V
Short Circuit Current(Isc) 1.88A
Mechanical Characteristics
Cell Type Mono-crystalline 125×41.6mm
No of Cell 36 (4x9pcs)
Dimensions 449x554x25mm
Weight 2.8Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*41.6mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Best Solar Power Installers
Energy Installation Company
New Jersey Best Solar Panel Installation NJ; Sun power; jersey solar; solar power; new jersey; Best solar panel installation NJ;
We are NJ Best Solar Electric systems installation company.
NJ Residential Solar Electric
We install a wide variety of residential solar electric solutions in New Jersey.
Because of lower silicon purity, polycrystalline solar panels are not quite as efficient as monocrystalline solar panels. Lower space-efficiency. You generally need to cover a larger surface to output the same electrical power as you would with a solar panel made of monocrystalline silicon.
NJ Commercial Solar Electric
We special in custom commercial solar electric systems.
NJ Clean Energy Program.
We install residential and commercial solar electric systems for the NJ Clean Energy Program.
Best Solar Panel Installation Essex County NJ
Essex County NJ Solar Installers
Essex County NJ New Jersey Solar Installers
New Jersey Solar Installers
Solar panel installation nj
Solar panel installation Essex County NJ
Top Solar panel installers
clean energy nj
solar new jersey
Newark NJ Best Solar panel installer
Livingston NJ
Maplewood NJ
Free Quote
$0 down
zero down
cost efficient
save money
save on energy bill
lower electric
house
Kearny
Short Hills NJ
Florham park NJ
Bloomfield NJ
Irvington NJ
good
Millburn nj
west caldwell nj
orange nj
west orange nj
south orange nj
union nj
elizabeth nj
Paterson nj
bergen county nj
Home
I soldered a 2x 3″ 5.0V (make certain you use a 5.0V solar panel- on eBay/ Amazon) solar panel to a TP 4056 ( on eBay) lithium ion battery charging board. The output is soldered to a 18560 battery cradle (holder). No need for a diode- the motherboard will shut down at 4.2V which is considered a fully-charged cell. Good project for a young person interested in STEM or an adult at home. I have my students carry this project out in my ‘intro. to fuels’ lab course .