2016 China New Design Mono-Crystalline 150W Solar Panel to Puerto Rico
Short Description:
Gaining customer satisfaction is our company's aim forever. We will make great efforts to develop new and top-quality products, meet your special requirements and provide you with pre-sale, on-sale and after-sale services for 2016 China New Design Mono-Crystalline 150W Solar Panel to Puerto Rico, As we are moving forward, we keep an eye on our ever-expanding product range and make improvement to our services.
Mono-Crystalline 150W Solar Panel
Technical parameter
Maximum Power(W) 150W
Optimum Power Voltage(Vmp) 17.92V
Optimum Operating Current(Imp) 7.83A
Open Circuit Voltage(Voc) 21.86V
Short Circuit Current(Isc) 8.59A
Mechanical Characteristics
Cell Type Monocrystalline 156x156mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1485x668x35mm
Weight 11.6KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Close tolerance screen and stencil printing is usually associated with smaller-format substrates and print areas such as used in micro-electronics. In recent times, however, there is a growing need for larger-format applications as used in the medical, solar, display, and flexible electronic circuitry fields. http://www.precoinc.com
Here I take you through the process of starting the solar system power.
You must follow these steps in order to avoid damage to equipment and operate the system safely.
1. Turn on the Breakers in the Combiner Box, which energizes the conduit from the solar panels to the enclosure panel.
2. Turn on the Breaker from the Battery Bank to the Charge Controller, powering up the charge controller, then selecting the correct settings.
3. Turn on the Breaker from the Combiner to the Charge Controller, this initiates the charging of the batteries from the solar.
4. Turn on the Breaker from the Enclosure panel to the Inverter, powering on the Inverter and energizing the circuit.
This is a video in my series on how to install a stand-alone battery backup solar power system.
System specs and major component parts:
48Volt Nominal System
4100Watt Solar Array (18 x 230Watt SoPray Polycrystalline Photovoltaic Solar Panels)
4400Watt 48V Magnum Pure-Sine Inverter,
Outback FM80 80Amp Charge Controller with MPPT
16 x L-16 6V Deep Cycle Batteries
Main Enclosure Panel (Custom API E-Panel)
Midnight Solar 6 String Combiner Box
UniSolar Roof Rack and Fast Jack Mounting
**Solar power arrays and components are designed to be installed by professionals. They are Dangerous electrical instruments. Misuse could result in injury or death. Please do not try this at home.