20 Years manufacturer Poly-crystalline Solar Panel 3W Manufacturer in Norway
Short Description:
We emphasize development and introduce new products into the market every year for 20 Years manufacturer Poly-crystalline Solar Panel 3W Manufacturer in Norway, We warmly welcome business partners from all walks of life, expect to establish friendly and cooperative business contact with you and achieve a win-win goal.
Poly-crystalline Solar Panel 3W
Technical parameter
Maximum Power(W) 3W
Optimum Power Voltage(Vmp) 9V
Optimum Operating Current(Imp) 0.34A
Open Circuit Voltage(Voc) 10.8V
Short Circuit Current(Isc) 0.37A
Mechanical Characteristics
Cell Type Polycrystalline
No of Cell 18 (2x9pcs)
Dimensions 145x245x18mm
Weight 0.52KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 10A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Polycrystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
http://teslachargers.com/solartrackeriii.html This is the new 3 amp 12 volt small portable Tesla Solar Tracker 5 designed by John Bedini using his new revolutionary linear current regulator circuits.
This demo uses a very old and very small 0.36 watt (12v 30ma) thin film solar panel. It actually puts out enough to kick on unit and charge a small 12v battery! Is seems that no panel is too small.
Learn how to replace the worn or broken back cover for Xperia Z2 by yourself. Recycle your old NFC. Follow the video step by step, and you can do DIY repair. Get original Xperia Z2 back cover at http://bit.ly/1aEMOts ; get custom Xperia Z2 back cover at http://bit.ly/1EhKeo3 ; get original Xperia Z2 Replacement Parts at: http://bit.ly/1DOQLmL .
Steps
1. Remove the back cover;
2. Peel off the old NFC from old back cover
3. Put your old NFC on the new back cover
4. Install new back cover.
Tools
1. Heat gun or hair dryer;
2. Suction cup – http://bit.ly/1Mbid2L;
3. Guitar picks – http://bit.ly/1E6tMWJ;
Tips: Don’t forget to clear the camera lens before you put back the back cover.
To learn to DIY repair other components or other phones, don’t forget to subscribe our Youtube and other channels:
Follow Us on Twitter: https://twitter.com/witrigs
Like Us on Facebook: http://www.facebook.com/witrigsgroup
Add Us on Google+: https://plus.google.com/+Witrigs-com/posts
Subscribe Us on Blog: http://www.witrigs.com/blog/
-~-~~-~~~-~~-~-
The expenditure of creating repair guide videos is trending up. Donate now if you feel our videos so helpful. https://www.paypal.me/witrigs/2
Like our Facebook Page https://business.facebook.com/Witrigs-1718915445072177/
-~-~~-~~~-~~-~-
