19 Years manufacturer Poly-crystalline Solar Panel 100W for Ecuador Factory
Short Description:
As a result of ours specialty and service consciousness, our company has won a good reputation among customers all over the world for 19 Years manufacturer Poly-crystalline Solar Panel 100W for Ecuador Factory, We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development.
Technical parameter
Maximum Power(W) 100W
Optimum Power Voltage(Vmp) 17.87V
Optimum Operating Current(Imp) 5.60A
Open Circuit Voltage(Voc) 21.45V
Short Circuit Current(Isc) 6.17A
Mechanical Characteristics
Cell Type Polycrystalline 156x104mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1120x678x35mm
Weight 9.7KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Polycrystalline solar cell 156*52mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Go to http://crossmyt.com/thankyou.htm
Have you wondered whether you could take part in renewable energy for your home? You have heard about all of the people going solar these days but it seems to be quite expensive, and it is if you do it the conventional way.
We have come across a program that will teach you how to do DIY solar panels affordably and relatively easily. This was the result of a university project that sought to find the best and most affordable DIY solar power systems and wind power systems that the average person could build. When they were done the results were built and tested by high school students to show that anyone could build them. They built 200 watt solar panel systems for about $200 and 1000 watt wind power systems for about $100.
This program gives detailed schematics as well as all of the instructions necessary to build either or both of these power systems. It also will tell you where to find all of the materials necessary, mostly at your local hardware store. You will also learn how to connect the system to your home as well as how to maintain the system. Along with the detailed instructions, you receive training videos as well. These systems that you can build are 100% safe and 100% legal.
You can not only save on your energy costs but you can also become more environmentally friendly. And wouldn’t it be nice to see your utility bills go down instead of that upward spiral.The next time the power goes out in your area, you can be the one that still has electricity because of your diy solar power system.
If you end up getting this program you will have no regrets, especially since it comes with a money back guarantee. The best thing is that you can get this information on diy solar panels and wind turbines for less than $50.
Cuatro profesores investigadores de la Universidad Tecnológica del Centro de Veracruz (UTCV) realizaron un trabajo de investigación sobre la medición y análisis puntual de la radiación global disponible en Cuitláhuac, Veracruz; trabajo que podrá ser utilizado para las personas que se dedican a la instalación de equipos fotovoltaicos, como paneles solares para el aprovechamiento de la energía solar.
El profesor de la UTCV en Energías Renovables y máster en dicha especialidad, Jesús Juárez Borbonio, detalló que los datos de radiación global se midieron en el edificio de docencia de la Universidad, desde el pasado 1° de enero de 2014 hasta el 31 de diciembre del 2015, obteniendo resultados importantes para la toma de decisiones puntuales en la instalación de paneles fotovoltaicos.