19 Years manufacturer Mono-Crystalline 100W Solar Panel to Sri Lanka Importers
Short Description:
Adhering to the principle of "quality, service, efficiency and growth", we have gained trusts and praises from domestic and international client for 19 Years manufacturer Mono-Crystalline 100W Solar Panel to Sri Lanka Importers, Sincerely hope we are growing up together with our customers all over the world.
Mono-Crystalline 100W Solar Panel
Technical parameter
Maximum Power(W) 100W
Optimum Power Voltage(Vmp) 18.66V
Optimum Operating Current(Imp) 5.36A
Open Circuit Voltage(Voc) 22.72V
Short Circuit Current(Isc) 5.92A
Mechanical Characteristics
Cell Type Monocrystalline 125x125mm(5 inch)
No of Cell 36 (4x9pcs)
Dimensions 1200x554x35mm
Weight 7.8Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
“You don’t wanna do it like that – you wann do it like this”. What’s the best way to make acdurate holes in project boxes for switches, displayes etc.? I do it with a dremmel, and I find it tedious, error-prone, messy and tmie-consuming. If you have any helpful advice for me, please let me know in the comments below.
A small-bandgap electron acceptor ATT-2 is designed and synthesized. By combining PTB7-Th donor, power conversion efficiencies reach 9.58% and 7.74% for opaque and semitransparent devices, respectively. The highest PCE among single-junction STOPVs can be attributed to the beneficial complementary nearinfrared absorption of the low-bandgap donor and small-bandgap acceptor. Non-fullerene acceptors are thus very promising for the development of high performance STOPVs. This is reported by Xiaozhang Zhu and co-workers in the article 10.1002/adma.201606574. To know more, please go to the Advanced Materials homepage.
