18 Years Factory offer Poly-crystalline Solar Panel 80W for Niger
Short Description:
Assume full responsibility to meet all demands of our clients; achieve continuous advancements by promoting the growth of our clients; become the final permanent cooperative partner of clients and maximize the interests of clients for 18 Years Factory offer Poly-crystalline Solar Panel 80W for Niger, we are looking forward to even greater cooperation with overseas customers based on mutual benefits. Please feel free to contact us for more detail
Poly-crystalline Solar Panel 80W
Technical parameter
Maximum Power(W) 80W
Optimum Power Voltage(Vmp) 18.13V
Optimum Operating Current(Imp) 4.70A
Open Circuit Voltage(Voc) 21.79V
Short Circuit Current(Isc) 5.16A
Mechanical Characteristics
Cell Type Poly-crystalline 156x104mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1008x678x35mm
Weight 8.3KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*104mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Hello friends ,I have uploaded this video which uses solar energy without any circuits in between.As everyone know solar energy is ecofriendly in nature, so i have done the same.All you need for this project is listed below.
1:1 Fused led bulb(Not working)
2:pliers
3:soldering machine-to complete the circuit and remove other electronic components.
4:Digital Multimeter–to check the cotinuty of the leds
5:Power source—you can use dc batteries,but I recommend you to use solar energy.
This were the things needed for the project,Hope you liked my project.If you have any doubt ,you can write in the comment section below.SUBSCRIBE me if you have not done yet.Thanks for watching.You can also catch me on facebook and instagram by following the given link below…
https://www.instagram.com/_mohitpanjabi/
https://www.facebook.com/mohit.panjabi.98
Systellar installed and commissioned 160 KWp Grid-tied Rooftop Solar Power plant in Faridabad, Haryana. The system uses mono-crystalline and poly crystalline solar panels & 7 nos. of Schneider 25 KW Grid-tied inverter. System performance can be remotely monitored through internet from anywhere.
The power plant has been generating clean solar power for last 6 months and has delivered peak performance of 850+ units.
For more information you can visit company website: http://systellar.co.in/solar-power-plant-installation/
