18 Years Factory Mono-Crystalline 200W Solar Panel for Kenya
Short Description:
We are ready to share our knowledge of marketing worldwide and recommend you suitable products at most competitive prices. So Profi Tools offer you best value of money and we are ready to develop together with 18 Years Factory Mono-Crystalline 200W Solar Panel for Kenya, We sincerely welcome all guests to set up business relationships with us on the basis of mutual benefits. Please contact us now. You will get our professional reply within 8 hours.
Mono-Crystalline 200W Solar Panel
Technical parameter
Maximum Power(W) 200W
Optimum Power Voltage(Vmp) 37.29V
Optimum Operating Current(Imp) 5.36A
Open Circuit Voltage(Voc) 45.48V
Short Circuit Current(Isc) 5.89A
Mechanical Characteristics
Cell Type Monocrystalline 125x125mm (5 inch)
No of Cell 72 (6x12pcs)
Dimensions 1580x808x35mm
Weight 14.5Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
This is a part two video on EMP or solar storm preperations. This video will focus on solar or alternative power systems and what I think about how vulnerable systems like these to survive an EMP or CME event. This information is not rock solid. I recomend you do your own research and please feel free to share your info with me and others..
Hello friends ,I have uploaded this video which uses solar energy without any circuits in between.As everyone know solar energy is ecofriendly in nature, so i have done the same.All you need for this project is listed below.
1:1 Fused led bulb(Not working)
2:pliers
3:soldering machine-to complete the circuit and remove other electronic components.
4:Digital Multimeter–to check the cotinuty of the leds
5:Power source—you can use dc batteries,but I recommend you to use solar energy.
This were the things needed for the project,Hope you liked my project.If you have any doubt ,you can write in the comment section below.SUBSCRIBE me if you have not done yet.Thanks for watching.You can also catch me on facebook and instagram by following the given link below…
https://www.instagram.com/_mohitpanjabi/
https://www.facebook.com/mohit.panjabi.98