17 Years manufacturer Poly-crystalline Solar Panel 250W Factory in Tunisia
Short Description:
All we do is always associated with our tenet " Customer first, Trust first, devoting on the food packaging and environmental protection for 17 Years manufacturer Poly-crystalline Solar Panel 250W Factory in Tunisia, "Create Values,Serving Customer!" is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, Please contact with us now
Poly-crystalline Solar Panel 250W
Technical parameter
Maximum Power(W) 250W
Optimum Power Voltage(Vmp) 30.25V
Optimum Operating Current(Imp) 8.26A
Open Circuit Voltage(Voc) 36.61V
Short Circuit Current(Isc) 8.89A
Mechanical Characteristics
Cell Type Polycrystalline 156x156mm (6 inch)
No of Cell 60 (6x10pcs)
Dimensions 1640x990x40mm
Weight 18.5KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Polycrystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Got the first Hanwha panel installed on my East South East Array, Morning sun Array.
More at http://krayden.com/dow-corning-ci-2001/
Dow Corning CI-2001 White Reflective Silicone Coating designed to enhance light output and efficiency in LED lamps and luminaires. Dow Corning Ci -2001 tutorial shows you the steps to apply the coating and the precautions that need to be taken
request more information from a Krayden Technical Expert: http://krayden.com/contact/ask-an-exp…
Find Dow Corning CI-2001 White Reflective Coating Products http://krayden.com
‘-Krayden a Dow Corning Distributor presents Dow Corning CI-2001 White Reflective Silicone Coating
- Illuminating Innovations, Dow Corning CI-2001 Highly Reflective Optical Silicone Coating
Dow Corning CI-2001 White Reflective Coating Features and Benefits
- Cures to a resilient highly reflective surface
- UL flammability Classification at 3mil V0
- Room temperature cure
- Low viscosity enhances flow and fills in narrow gaps and spaces
- Silicone solvent-borne resin in reduced solvent
- Dielectric strength 620 Volts/mil
- Excellent resistance to environmental aging
- Used in the assembly of LED lamps / luminaires
Dow Corning’s CI-2001 White Reflective Coating helps improve light output and efficiency of LED lamps and luminaires when it’s applied onto reflectors, mixing chambers,back light units, and PCB. Mixed with one part sprayable coating provides a homogeneous finish with better environmental resistance.
It cures at room temperature to a tough, non-tacky surface. It can be applied by spray, flow, dip, or selective coating. Dow Corning Ci-2001 coating is designed to be sprayed in industrial paint spray equipment, standard-pressure paint spray guns, or high-volume, low-pressure spray guns. Product settling may occur during storage and shipping. You can also vigorously stir the product to re-disburse the reflective filler.Either way, the material must be mixed well and be homogeneous before
and after you dilute it. For spraying operations,a dilution of up to 20% is recommended. If possible, select a spray gun with a least a two-step or a double-action trigger. For air guns, the optimal fluid pressure is between eight and 20 PSI. Before you begin coating,spray a horizontal test pattern on paper with the air cap in the vertical position.Hold the trigger open until the material begins to run. There should be an even distribution of the material. If not, adjust the pattern width with the spreader adjustment valve. This testing will help you determine the best distance and speed combination to achieve your best coverage and finish. As a rule of thumb, begin by testing at a distance of nine to 12 inches from the gun tip to the sample at a speed of approximately 12 inches per second. If the gun is too close,
waves of coating material may be deposited, but if the gun is too far away, there might be gaps in the coating layer. Approximately one inch after reaching the end of the sample, reduce the pressure until only air is expelled from the gun. Maintaining your steady speed, continue the gun movement for at least five more inches. This last step should keep the gun free from accumulated coating which could cure between applications and clog the gun. For dip coating operations, the material may be used as supplied.
Or solvent diluted if a thinner film is desired. Dow Corning CI-2001 Coating cures quickly when exposed to moisture.Keep containers tightly closed with minimal head space. Partially filled containers should be purged with dry air or other gases, such as nitrogen.
If you are using dip tanks, these should be covered when not in use. Dow Corning CI-2001 White Reflective Coating is formulated to provide adhesion to most common substrates and materials. The tack-free and cure times can be shortened significantly by introducing mild heat up to 60 degrees Celsius and 70 percent relative humidity. you may improve adhesion by priming or with special surface treatments, such as chemical or plasma etching. A typical cure for a five mil coating is 10 minutes at room temperature, followed by 10 minutes at 60 degrees Celsius. And you should never cure a coating at temperatures above 60 degrees Celsius.
Products
Below are just some of the products available to purchase online or by requesting a quote at http://krayden.com/contact/quick-quote/
Dow Corning CI-2001 0.5 KG Can White Reflective Coating
Dow Corning CI-2001 3.4 KG White Reflective Coating
Dow Corning CI-2001 15 KG Pail White Reflective Coating
Dow Corning CI-2001 White Reflective Silicone Coating Technical Data Sheet
http://krayden.com/technical-data-sheet/dow_corning_ci-2001_technical_data_sheet/
****************************
Subscribe to Krayden Product Updates: http://krayden.com/feed/
Connect With Krayden
*****************************
Youtube: https://www.youtube.com/user/KraydenInc
Linkedin: https://www.linkedin.com/company/kray…
Twitter: https://twitter.com/Krayden_Inc
Facebook: https://www.facebook.com/KraydenIncAd…
Google+: https://plus.google.com/+KraydenAdhes…