17 Years manufacturer Mono-Crystalline 150W Solar Panel Factory in Mexico City
Short Description:
In order to best meet client's needs, all of our operations are strictly performed in line with our motto " High Quality, Competitive Price, Fast Service " for 17 Years manufacturer Mono-Crystalline 150W Solar Panel Factory in Mexico City, Looking to the future, a long way to go, constantly striving to become the all staff with full enthusiasm, one hundred times the confidence and put our company built a beautiful environment, advanced products, quality first-class modern enterprise and work hard!
Mono-Crystalline 150W Solar Panel
Technical parameter
Maximum Power(W) 150W
Optimum Power Voltage(Vmp) 17.92V
Optimum Operating Current(Imp) 7.83A
Open Circuit Voltage(Voc) 21.86V
Short Circuit Current(Isc) 8.59A
Mechanical Characteristics
Cell Type Monocrystalline 156x156mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1485x668x35mm
Weight 11.6KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Visit http://l1nk.com/earth4energy for information on how to build your own solar.
This begins the process to top-of-pole mount my 2 new 200Watt panels. I’m using an 11′ x 4″ OD x .24″ (Wall), Schedule 40 Extruded aluminum 6063 structural pipe. It’s encased in concrete in a hole drilled to about 51″ in depth and 18″ in diameter. There is 6″ of crushed rock at the base and a 7″ square block frame at ground level. Structurally, this mounting should withstand high winds, etc and last a long time. Also, hopefully, this will give a more professional look to this DIY project. I’m laying 50′ of flexible gray conduit from Lowes, in a trench 15′ x 5″ W x 8″ deep. This part of the project was not cheap but I believe it was worth it. If your going to do something worthwhile, enjoy it and make it worthwhile. You can get your pipe at a decent price online from “onlinemetals.com”. My top of pole mounts are from IRONRIDGE, model# UNI-TP/04, which you can get from “ecodirect.com” at a decent price. The 200W panels come from sunelect.com, they are the cheap Grade B’s, but who cares as long as they have a warranty and perform as good as the Grade A’s. Grade B means cosmetic defects.
Sungold solar 3x35w 2016 version 2.0.
www.sungoldsolar.com
105w folding solar panel kit
3*35w three folding solar module
Thin and light folding solar panel
Folding solar panel with carrying bag
